45
Auto
Sync
1024 ×768
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA Mode
H-Freq.
V-Freq.
Signal Format
Signal
[ RGB ]
ON
FRAME CREATION
Auto
33.7 kHz
60.0 Hz
1125(1080)/60i
XGA Mode
H-Freq.
V-Freq.
Signal Format
Signal
[ Component ]
On
3D Y/C Filter (NTSC)
Auto
Colour system
Signal
[ AV ]
Signal
[ Digital ]
Off
24p SMOOTH FILM
33.7 kHz
60.0 Hz
1125(1080)/60i
H-Freq.
V-Freq.
108.0 MHz
Dot Clock Freq.
Signal Format
60Hz
3D 24p Film Display
Auto
HDMI Range
Note:
“Signal” setup menu displays a different setting condition for each input signal.
Signal menu
For Video (S VIDEO)
For RGB
For Component
For Digital
(Example: HDMI input)
Setup menu
External scaler mode
Power save
PC Power management
Auto power off
Off
Off
Off
Off
OSD design
Type1
OSD position
Upper left
OSD Language
English (UK)
Extended life settings
Screensaver
Network Setup
Input label
Component/RGB-in select
RGB
3D Settings
Signal
Input signal display
Displays the frequency and the type of
the current input signal.
This display is valid only for
Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
2
access
1
select
Select the item and set.
2
change
1
select
• 3D Y/C Filter
This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
On
Off
Note:
When On, this setting only affects NTSC input signals.
• Colour system
This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
Auto
SECAM
M.NTSC
NTSC
PAL
Set the colour system to match the input signal. When “Auto” is set, Colour system will be automatically selected
from NTSC/PAL/SECAM /M.NTSC.
To display PAL60 signal, select “Auto” or “PAL”.
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases
become unstable. Should this occur, set the system to match the format of the input signal.
• XGA Mode
This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA
signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz,
1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Auto
1024×768
1280×768
1366×768
Auto:
Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution
condition.
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as
necessary. (see page 25)