Panasonic TGB810S, Руководство по эксплуатации

Страница: 32 / 48

32
For assistance, please visit http://shop.panasonic.com/support
Useful information
Handset does not ring
● The handset ringer volume may
be set to Off, see page 28.
Noise interference on my
phone or on other electrical
equipment nearby
● Place the phone at least one
metre away from electrical
appliances or any metal
obstructions to avoid any risk of
interference.
Registering a handset
On the base unit:
1
Press and hold
L
p
R
for 5
seconds. The base unit will
remain in registration mode for
120 seconds.
On the handset:
2
If “Unregistered” is displayed,
press
L
MENU/OK
R
and then enter
the 4 digit PIN code (0000) and
press
L
MENU/OK
R
.
3
If “Searching” or “Unavailable”
is displayed, press
L
MENU/OK
R
,
L
d
R
“Advanced setting” ,
press
L
MENU/OK
R
.
4
L
d
R
“Register” , press
L
MENU/OK
R
.
5
Enter the 4 digit PIN code (0000)
and press
L
MENU/OK
R
.
A beep will be heard if the registration
is successful. The handset is
automatically assigned an available
handset number.
● Clean the charge contacts with a
dry cloth.
● Check that the mains power is
connected properly.
● The battery is full. When the
handset is fully charged, will
appear steadily on the display.
I cannot enter the time when
setting the date and time
● You need to use 12-hour clock
format, but invalid time may be
displayed. Enter the time between
01:00 and 12:59.
No Caller Display
● You must subscribe to Caller
ID service. Contact your phone
service provider for details.
● The caller may have withheld their
number.
● The record cannot be found in the
phonebook. Check that the correct
name/number is stored in the
phonebook, with the full area code.
Cannot register a handset to the
base unit
● Check that correct PIN code
(0000) has been entered.
● Check that the handset and base
unit are at least one metre away
from other electrical equipment
to avoid interference when
registering.