Panasonic TG2550 - 2.4 Gigarange Cordless Phone Скачать руководство пользователя страница 49

Страница: 49 / 56

Useful Information

Before Requesting Help

Problem

“

No link to base Place

on cradle and try

again.

” is displayed and an

alarm tone sounds.

The unit does not work.

Static, sound cuts in/out,
fades. Interference from other
electrical units.

The handset does not ring.

The handset display is blank.

The handset display is still
blank after pressing

Remedy

•

You are too far from the base unit.
Move closer and try again.

•

Place the handset on the base unit and
try again.

•

Plug in the AC adaptor.

•

Raise the base unit antennas.

•

Check the settings (p. 10–15).

•

Charge the battery fully (p. 11).

•

Clean the charge contacts and charge
again (p. 12).

•

Install the battery properly (p. 48).

•

Place the handset on the base unit and
unplug the AC adaptor to reset.
Plug in and try again.

•

Re-install the handset battery within
3 minutes to avoid memory loss and
place the handset on the base unit.
Then try again.

•

Locate the handset and the base unit
away from other electrical appliances
(p. 3).

•

Move closer to the base unit.

•

Raise the base unit antennas.

•

Press

(EXIT/CH)

to select a clearer

channel.

•

The ringer volume is set to OFF.
Set to HIGH or LOW (p. 18).

•

If the line is connected to a low voltage
system such as a PBX, the unit may
not ring. Set the line mode to “B”
(p. 15).

•

The handset is in the stand-by mode
(p. 12). Press

to turn the

display on.

•

Charge the battery fully (p. 11).

Содержание TG2550 - 2.4 Gigarange Cordless Phone

























































Результаты поиска

Содержание TG2550 - 2.4 Gigarange Cordless Phone

Отзывы:

Похожие инструкции для TG2550 - 2.4 Gigarange Cordless Phone

Бренды по названию

Популярные бренды

Panasonic TG2550 - 2.4 Gigarange Cordless Phone, Руководство по эксплуатации

Результаты поиска

Содержание TG2550 - 2.4 Gigarange Cordless Phone

Отзывы:

Похожие инструкции для TG2550 - 2.4 Gigarange Cordless Phone

Бренды по названию

Популярные бренды