Panasonic TC-PXXGT30, Техническое руководство

Страница: 38 / 83

Solid Red LED Error Code (Locked Mode)
These conditions can cause the TV to shutdown while the power LED stays on (Solid
red)
New
1. Missing F15V while the TV is on
‰
Open connection between pins 10 and 11 of connectors P6 and A6.
2. Wrong diagnostic by the A board
Cautions: Disconnect the AC Power prior to making any disconnection or connection.
If the power LED continues to blink even after the TV is unplugged, press and hold the power switch on the TV for a few
seconds until the LED turns off.
When taking voltage reading, place the voltmeter probe at the test point, component, or connector’s pin indicated before
connecting the TV to the AC line. This will ensure voltage reading accuracy before the TV shuts down. (Since the TV is
shutting down, expect the voltage to only come up a couple of seconds.)
NOTE: When taking voltage reading, place your meter’s probe on the test point or pin indicated before connecting the TV
to the AC line. The voltage you intent to measure may only appear for a brief moment.
NOTE: Unlike the 2011 lower-end models, the result of a shorted Vsus, Vda, or P15 is not a Solid-Red-LED for GT and VT
modes.
Slide 38