Panasonic TC-P50VT25X, Руководство по эксплуатации

Страница: 10 / 148

10
Accessories/Optional Accessory
(Continued)
AC cord connection
Antenna terminal Pin terminals HDMI terminal
green blue red
green
Firmly tighten by hand.
Match colors of plugs and terminals.
Insert firmly.
Insert firmly.
Reference of connection
To attach To remove
Insert it firmly until the
tabs on both sides click
into place.
Keep pushing both
sides until they snap
and pull.
Location
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
a
b
c
c
Adjust the plasma panel to your
desired angle. (View from above)
TC-P50VT25X
a: 11.0 ” (277 mm)
b: 17.5 ” (443 mm)
c: 10°
Center of the
rotation.
Attaching / Removing the pedestal (continued)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (p. 9)
Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.
tc̲p65̲vt25x̲eng̲0015-2.indb 10 tc̲p65̲vt25x̲eng̲0015-2.indb 10 2010/05/27 16:40:31 2010/05/27 16:40:31