English
19
First Time Setup
The first time setup screen is displayed only when the
TV is turned on for the first time, after the power cord is
inserted into a wall outlet.
1
Turn the TV on with the POWER
button
(TV)
or
(Remote)
Note
●
Please wait a while to turn the TV on after inserting
the power cord into a AC outlet.
2
Setup the following items
●
Select your language
●
Select your viewing environment
●
Connect to the Internet
●
Set up the network connection
●
Select your time zone
Tuner
Antenna
Cable
Access
Select
RETURN
Channel Scan
Scan
Skip Scan
First, please connect cable or antenna.
Start channel scan now ?
If you skip this step, the channel scan could be performed in Menu
Confirm
Select
RETURN
Exit
select
confirm
●
To return to the previous screen / field
●
To exit channel scan
●
If some channels are not tuned correctly, you can try
to tune them by [Channel scan] in (TV Menu).
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit the wizard.
If tuning has failed check the RF cable, and the network
connection, and then follow the on-screen instructions.
Note
●
The TV goes into Standby mode when no operation
is performed. User can choose when the TV should
go into standby mode by selecting available options
in [Auto Sleep] in [Time Setup] (Setup) (Off / 4 / 6 / 8
hours).
●
The TV goes into Standby mode when no signal is
received and no operation is performed for
10 minutes if [No signal Power off] in the [Time Setup]
(Setup) is set to [On].
●
To retune all channels
[Channel scan] in (TV Menu)
●
To initialise all settings
[Factory defaults] in (Setup Menu)
TC-58_65GX700C.indb 19
TC-58_65GX700C.indb 19
24/7/2019 11:37:27 AM
24/7/2019 11:37:27 AM
