Product Outline
Switch-M24eGi is an all Giga bit Ethernet Switching Hub with management function
having 24 ports of 10/100/1000BASE-T and two pairs of 10/100/1000BASE-T port and
SFP extension slot, one of which is selectable.
1
7
1.1 Features
Has wire speed layer 2 switching functions.
Ports 1 to 22 are auto negotiation-ready 10/100/1000BASE-T ports. Their speed and
communication mode can be changed by configuration.
Ports 23 and 24 can be used as a 10/100/1000BASE-T port corresponding to autone-
gotiation or an SFP extension slot exclusively.
Also their speed and communication mode can be switched by configuration.
All twisted pair ports support straight/cross cable auto sensing function. Simply
connect devices with straight cables, whether it is a terminal or a network device.
(This function does not work if the port communication configuration is set at Fixed
or Link Aggregation. Ports 1 to 22 are set at MDI-X. (default))
Due to the loop detection/shutoff function, a port where loop has occurred can be
automatically shut off to prevent loop failures. When a port is shut off and recovered
automatically, SNMP trap can be sent to notify the incident to the administrator.
Moreover, the port with a loop can be identified by loop notification on the LEDs on
the main unit and referring the history of loop on the setting screen.
Has a loop detection history function, which notifies when a loop occurs with the
corresponding LED and enables a network administrator to identify the looped port
after the loop is removed.
Fanless design solves noise problem or fan failure.
Power consumption can be suppressed by switching off the port LEDs (left) via the
ECO mode LED functions.
The IEEE802.1p compatible QoS function is supported.
Has an Internet Mansion function, which ensures security between each door.
Has a port grouping function, which groups ports that are allowed to communicate
with one another to limit communications between different groups.
Equipped with energy efficient Ethernet (EEE) conforming to IEEE802.3az(LPI). When
there is no data transmission at link up, the energy-saving state automatically starts
so that power consumption can be reduced on each port.
Factory default : Disable
Embedded power saving mode detects the connection status automatically and saves
power consumption to minimum.
Factory default : Disable
IEEE802.1Q VLAN tagging is supported, and a maximum of 256 VLANs can be registered.
The IEEE802.1X compatible user authentication function (EAP-MD5/TLS/PEAP) is supported.
Each single port supports IEEE 802.1X, Web, and MAC authentication protocols,
eliminating the need for individually setting the ports’ authentication parameters.
Supports ZEQUO assist Plus. Processes from introduction to maintenance can be performed easily.
