48
When the printer stops while printing:
If the printer stops while printing, the
following are probable causes:
When [Printing in process. Wait without
removing paper] is displayed and the
paper stops in the Paper Inside Slot:
The printer is being preheated when the
ambient temperature is low. Printing will
resume after preheating, so wait and do
not remove the paper.
When the printer stops after delivering
paper from the rear side:
The ink cassette may have come off while
printing.
Check that the ink cassette is properly set.
When the printer stops with the
indication of the error message, [Paper
jam has occurred]:
Turn the printer OFF without removing the
paper and turn it ON again. If [Paper jam
has occurred] is still displayed, contact
your nearest Panasonic dealer.
ª
About the setting on the menu
screen
≥
When the power is turned OFF by
pressing the Power button, settings
carried out on the menu screen are
turned back to the initial settings.
However, in the following cases, this
printer retains the previous settings:
-
When the printer is turned off owing
to the low-battery cutoff
-
When Auto-power-save function is
activated
≥
When the power is turned OFF owing to
the low-battery cutoff (or Auto-power-
save function is activated) during DPOF-
printing or when printing two or more
images, the images that remain
unprinted are held in memory. When the
power is turned ON again, the message,
[Last print job interrupted. To abort push
[MENU].] will be displayed for approx. 5
seconds. If the [MENU] button is pressed
when this message is displayed, printing
will not continue.
ª
Condensation
≥
When a bottle is taken out from a
refrigerator in summer and left standing
for a while, droplets of water will form on
it. This phenomenon is known as
condensation. Condensation will form if
the printer or Ink Cassette/Paper Set is
moved to a location with a considerable
difference in temperature or humidity,
such as:
-
A high-humidity location, such as one
filled with steam
-
When suddenly moved from an air-
conditioned environment to one with
high temperatures and high humidity
-
A room that has just been heated
If condensation occurs, Printer cannot be
used. Wait for 1 hour. If the paper or rollers
are damp with condensation, the printed
surface that is produced may be
degraded.
ª
About Unclean Thermal Heads
If a line appears across a printed picture
and pictures cannot be printed clearly, the
Thermal head, located in the insertion
portion of the Ink Cassette, may be dirty. In
this case, clean it with the auxiliary Head
Cleaner.
Open the Ink Cassette Compartment
Door, remove the Ink Cassette and
push the head cleaner in and out
several times as illustrated.
P20U.book 48 ページ ２００３年１月７日 火曜日 午後３時１０分
