LINE IN recording
Press
or
Press
RECORD MODE
( page 33, LINE IN)
The recording standby mode is established after the recording source device
play is completed. When is pressed, the recording standby mode is exited.
Press
In this mode, files are created and recorded for each track played by
the recording source device. If the unit is already switched to LINE IN
mode, the LINE IN standby screen shown in step 1 will be displayed.
3
3
2
1
RQTT0845
28
AUTO SYNC. mode
Press
• Press again to release the recording standby mode.
• The standby screen in step 1 appears when the recording standby
mode remains established for 10 or more minutes.
1
Select “LINE IN”.
( page 15, Selecting modes)
4
Complete the recording when the recording source device stops.
USB cable (included)
Turn the unit on
/ LINE OUT
2
Set to the recording standby mode.
3
Recording starts when the
recording source device is played.
3. Connect the recording device to the unit.
Connect the LINE OUT connector or earphone jack of the recording
source device to the unit’s USB connector using the USB cable supplied.
When connecting with the earphone jack, adjust the volume of the
recording source device before connecting.
Preparation:
(M3 jack)
Standby screen
MP805_810VEn_2.indd 28
2005/12/28 13:50:45