Preparation
11
11
11
11
Installation and Connections
ª
Installation
Be sure to install the stand when selecting the Vertical layout. And the
feet when selecting the Horizontal layout.
Installation for Vertical Layout
1
Install the stand to the hole like a illustration.
2
Tighten the screw and fix the main unit and the stand.
Installation for Horizontal Layout
1
Attach the feet for Horizontal Layout to the four corners
of the side which does not have a vent of the main unit.
(Attach them to the position of the mark
A
.)
ª
Precautions During Setup
As this printer gets hot during use, operate it in a well ventilated area.
Place printer at least 10 cm away from any walls to the left, right, above
or rear of printer. Do not place any objects on top of printer.
≥
When detaching the feet, coating may be peeled off. Do not detach
them after attaching them.
≥
Select [Vertical] or [Horizontal] under [Layout] after installation and
connections. (Initial setting: [Vertical])
≥
If you do not select the [Layout] menu, the direction of operation of the
Cursor buttons is different when using with the Horizontal layout.
ª
Connections
For Connection to TV
1
Connect the AC Mains Lead (supplied) to the main unit
and Household Mains Socket with the cord hooked to
the cord stopper.
2
Connect the Video cable (supplied) to [VIDEO OUT]
Socket on main unit and the Video Input Socket on TV.
≥
After connections, turn on the Photo Printer and TV, and switch the
input to the video input.
For Connection to PC
1
Connect the AC Mains Lead (supplied) to the main unit
and Household Mains Socket with the cord hooked to
the cord stopper.
2
Connect the USB Connection Cable (not supplied) to the
USB Socket on main unit and the USB Socket on PC.
≥
General USB A-B Cable can be used.
≥
After connections, see page 33.
ª
Paper That Can Be Used For Printing
The Photo Printer can use the following types of paper. Use Ink
Cassette/Paper Sets that bear the
mark. (Print Sets that bear the
µ
mark, the
∂
mark, or no mark at all cannot be used.)
≥
9 x 12 cm printing paper*
*with borders
: The Ink Cassette/Paper Set
VW-APA50E is required.
≥
16 Pre-Cut Adhesive paper (overcoat type): The Ink Cassette/Paper
Set VW-APASD16E is required.
≥
10 x 15 cm printing paper* (overcoat type)
*without borders
: The Ink
Cassette/Paper Set VW-APKC36E is required.
≥
Use the Ink Cassette with the paper provided in the same box.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE
.
A
1
2
TV
1
PC
2
Installation
Vertical Layout
Horizontal Layout
Connections
SV‑AP10B.book 11 ページ 2002年9月18日 水曜日 午前8時55分
Содержание SV-AP10B
Страница 55: ...55 55 55 55 ...