![background image](http://html.mh-extra.com/html/panasonic/super-dynamic-iii-wv-ns202a/super-dynamic-iii-wv-ns202a_installation-manual_277686005.webp)
5
The network camera WV-NS202A is designed to operate using a PC on a network (10BASE-T/100BASE-TX).
By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a
network. *
1
Progressive output with the super dynamic 3 function
SUPER-D 3 compensates brightness on a pixel-to-pixel basis so that it produces clearer images even if objects have
various illumination intensities. The progressive output (with motion adaptive interlace/progressive conversion*)
achieves high resolution image display.
* Motion adaptive interlace/progressive conversion function
The motion adaptive interlace/progressive conversion function compensates aliasing of images (that is specific to
interlace scan when shooting motion) and converts images into progressive images. By converting into progres-
sive images, clear images of both motion and stationary objects will be created.
JPEG/MPEG-4 dual encode
MPEG-4 images can be monitored while recording JPEG images.
Power over Ethernet (IEEE802.3af compliant) function is featured
When connecting with a PoE (Power over Ethernet) device, power will be supplied by simply connecting a LAN cable.
Interactive communication with audio (transceiver type) is available
By using the audio output connector and the microphone in connector, receiving audio from the camera on a PC and
transmitting audio from the PC to the camera is available. (Transceiver type is the communication type that
receives/transmits audio alternately between two operators. It is impossible to receive/transmit audio simultaneously
between them.)
High power lens and high accuracy preset position function
A single camera provides wide area monitoring.
Upside-down installation is available
The camera can be installed not only on the ceiling but also on desktop.
When using an optional mount bracket, embedded installation on a ceiling or mounting on a wall is available.
Simple Black & white mode
Images will be displayed clear even at night since the camera will be automatically switched from the color mode to
the black and white mode under low illumination condition.
SD memory card slot
Images can be recorded on an optional SD memory card*
2
both automatically (when images fail to transmit using the
FTP periodic transmission function) and manually.
*1 It is necessary to configure the network settings of the PC and its network environment to monitor images and
audio from the camera on the PC. It is also necessary that a web browser is installed on the PC.
*2 Performance with this camera has been checked by using Panasonic’s SD memory cards (64 MB, 128 MB,
256 MB, 512 MB, 1 GB, and 2GB). If another SD memory card is used, this camera may not operate properly.
Preface
Features
Содержание Super Dynamic III WV-NS202A
Страница 27: ...27 ...