![background image](http://html.mh-extra.com/html/panasonic/super-dynamic-iii-wv-ns202a/super-dynamic-iii-wv-ns202a_installation-manual_277686012.webp)
12
Rear view
• About the [INITIAL SET] button
Turn on the power of the camera while holding down this button, and wait for around 5 seconds without releasing
this button. Wait another 1 minute after releasing the button. The camera will restart and the settings including the
network settings will be initialized.
The settings including the network settings will be initialized. Note that the preset position settings will not be ini-
tialized.
MONITOR OUT
AUDIO OUT
MIC IN
EXT I/O
4 3 2 1
12V IN
POWER
INITIAL
SET
ACT
LINK
10BASE-T/
100BASE-TX
Safety wire holder
Monitor out connector
Audio output connector
Microphone in connector
External I/O terminals
DC 12 V power terminals
Power LED
[INITIAL SET] button
Cable guide
Network connector
Link LED
Access LED
Screw hole for a tripod (1/4-20UNC)
Important:
Use this hole only when the camera is to be
installed on desktop using a tripod.
Do not use this hole to mount on the ceiling since
the fall prevention measure is unavailable.
Содержание Super Dynamic III WV-NS202A
Страница 27: ...27 ...