6
Listening to the Radio
A
7
1
2
3 5
,
6
HOLD
4
HOLD
VOL
RADIO
VOL
VOL
OPR
OFF
RADIO/
BAND
TUNING
MODE
L
R
B
2
3
1,
1 3 5
2 4
RADIO
OPR
OFF
MEMORY/
RECALL
RADIO/
BAND
TUNING
MODE
Plug type:
3.5 mm (1/8 in.)
stereo
(Beep)
(Beep) (Beep)
(Beep)
(Beep)
(Beep)
A
1
Release [HOLD].
2
Connect the wired remote control
and stereo headphones/stereo ear-
phones to [
Ë
].
(Plug in firmly.)
3
Press [RADIO/BAND] (main unit) or
[RADIO] (remote control) to turn on
the radio.
4
Press [TUNING MODE] (main unit)
to set to Free Mode.
The display in Free Mode is as follows.
5
Press [RADIO/BAND] (main unit) or
[RADIO] (remote control) to change
the band.
Each time the button is pressed;
FM
(----.
AM
6
Press [
9 i
,
j :
] (main unit),
or [
9
] or [
:
] (remote control)
to select the frequency of the sta-
tion.
i
,
9
: increases frequency
j
,
:
: decreases frequency
For your reference:
≥
Press for over 1.5 seconds to make the frequen-
cy change rapidly.
≥
“TUNED” is displayed when a station is tuned.
7
Adjust the volume.
∫
To turn off the radio
∫
Press [
∫
, OPR OFF] (main unit) or press and hold
[RADIO] (remote control).
Listening Operation
B
Putting stations into the channels
Frequencies of up to 30 stations can be stored; 20 FM
and 10 AM.
Preparation:
≥
Release [HOLD].
≥
Connect the stereo headphones/stereo earphones as
they act as an FM antenna.
1
Press [RADIO/BAND] (main unit) or
[RADIO] (remote control) to turn on
the radio.
2
Press [TUNING MODE] (main unit)
to set to Memory Mode.
The display in Memory Mode is as follows.
3
Press [RADIO/BAND] (main unit) or
[RADIO] (remote control) to change
the band.
Each time the button is pressed;
FM
(----.
AM
4
Put stations into the channels of
your choice.
(main unit only)
1
Press [MEMORY/RECALL].
1
The frequency number flashes.
2
Within 10 seconds
1
Press [
9 i
,
j :
] to select
the frequency to be memorized.
3
Within 10 seconds
1
Press [MEMORY/RECALL].
1
The memory number flashes.
4
Within 10 seconds
1
Press [
9 i
,
j :
] to select
the memory number to store the
frequency.
1
FM station:
up to 20
1
AM station:
up to 10
5
Within 10 seconds
1
Press [MEMORY/RECALL] to con-
firm the memory setting.
≥
Press [
9 i
,
j :
] for over 1.5 seconds to
make the frequency or memory number change
in succession.
≥
“TUNED” is displayed when a station is tuned.
Free Mode
You can tune directly to the station in
Free Mode
by finding the station’s frequency, or you can store the station in
Memory Mode
to make tuning simpler.
You can choose these modes with [TUNING MODE].
Memory number
C
S-XBS
AUTO
RANDOM
MEMORY
FM
AM
VOL
MONO
CITY
TUNED
SORRY
1
M
C
S-XBS
RANDOM
MEMORY
AM
VOL
MONO
CITY
TUNED
SORRY
M
Memory Mode
∫
Recalling preset stations
Preparation:
≥
Release [HOLD].
≥
Connect the wired remote control and stereo head-
phones/stereo earphones to [
Ë
].
≥
Perform steps 1–3 of
“Putting stations into the
channels”
.
1
Press [
9 i
,
j :
] (main unit),
or [
9
] or [
:
] (remote control)
to select the desired station.
Memory number and broadcast frequency
changes.
2
Adjust the volume.
∫
To erase unnecessary preset
∫
stations from the memory
(main unit only)
Preparation:
Perform steps 1–3 of
“Putting stations into the chan-
nels”
.
1
Press [
9 i
,
j :
] to select the
memory number to be erased.
2
1
Press [MEMORY/RECALL].
1
The frequency number flashes.
2
Within 10 seconds
1
Press and hold [MEMORY/RECALL]
until “-- --” flashes .
3
Within 10 seconds
1
Press [MEMORY/RECALL] to
erase the memory number.
1
The memory number of the next preset station
appears on the display.
∫
To put a station into a channel you
erased
∫
Repeat the procedure described at left.
∫
To turn off the radio
∫
Press [
∫
, OPR OFF] (main unit) or press and hold
[RADIO] (remote control).
Important
After putting stations into channels, ensure the
unit has a constant power supply. Leaving it
without batteries or AC power for more than one
minute can clear the memory.
