![background image](http://html.mh-extra.com/html/panasonic/sl-ct489v/sl-ct489v_operating-instructions-manual_261304003.webp)
3
Resume function notes
≥
Opening the lid while in the stop mode or replacing the
disc while in the off mode cancels the function. (It may
remain active if you replace a disc in the off mode.)
≥
Play may resume from the beginning of the next track
if you stopped play near the end of a track.
≥
The resume function is automatic and you cannot turn
it off.
Removing discs
1
Press [
∫
, OPR OFF] to stop play
and disc rotation.
2
Slide [OPEN
1
] to open the lid.
3
Press [PUSH] to release the disc.
Do not stop the disc by hand or try to remove it before it
stops rotating. This can damage CDs.
Note
!
Never insert foreign objects into the unit.
Auto-off function
If you leave the unit in stop mode for about 10 minutes
(30 seconds if disc is not loaded), it turns off to save the
batteries.
Listening to CDs
Basic Play
3
4
1
5
HOLD
OPEN
C
S-XBS
AUTO
RANDOM
MEMORY
FM
AM
VOL
MONO
CITY
TUNED
SORRY
1
M
HOLD
VOL
2
VOL
VOL
OPR
OFF
L
R
PU
SH
PUSH
Elapsed playing time of each track
Track number in play
Label must face upward.
Close the lid.
1
Slide [OPEN
1
] to open the lid, and
insert the disc.
2
Connect the wired remote control
and the stereo headphones/stereo
earphones to [
Ë
].
(Plug in firmly.)
3
Release [HOLD].
4
Press [
1;
] (main unit) or press
[
∫
/
1
] (remote control) to start play.
(Play stops automatically when all the tracks have
been played.)
5
Adjust the volume.
i
: To increase the volume level
j
: To decrease the volume level
≥
The volume range is 0-25. (Press and hold to
change the volume successively.)
≥
A tone (beep-beep) sounds when you reach the
minimum or maximum volume when using the re-
mote control.
≥
The volume changes when pressed while the level
is displayed. If any other display is shown, it
changes to show the current level. (The volume re-
turns to 10 when you disconnect the power source.)
≥
If the unit has been connected to the car audio
system, set this unit’s volume to 10, then adjust
the volume level on the system.
∫
To pause play
(main unit only)
Press during play.
(Press again to restart play.)
∫
To stop play
Press during play.
∫
To turn off the unit
Press during stop mode (main unit) or press and hold
during play or stop mode (remote control).
The resume function remains active.
∫
Skip / Search function
Skip :
Press during play. (Press [
j :
] (main unit)
or [
:
] (remote control) twice to skip to the
beginning of the previous tracks.)
Search :
Press and hold during play.
≥
During program play (page 4), these buttons are used
to skip forward or backward through the programmed
sequence of tracks.
≥
You cannot skip to tracks that have been played in
random or random repeat play (page 4).
≥
During program play, 1-track repeat play, random play
and random repeat play (page 4), search operation is
limited to the current track only.
For your reference:
“
)
” indication
This indication appears for about 30 seconds if
[
1;
] (main unit) or [
∫
/
1
] (remote control) is pressed
when no disc is loaded in the unit or if the disc is not
properly secured.
“
*
” indication
This indication appears for about 10 minutes when the
lid is opened. (However, the indication does not appear
when the unit is powered off.)
Off mode
Stop mode
C
S-XBS
AUTO
RANDOM
MEMORY
FM
AM
VOL
MONO
CITY
TUNED
SORRY
1
M
Forward
Backward
Plug type:
3.5 mm (1/8 in.) stereo
OPR
OFF
C
S-XBS
AUTO
RANDOM
MEMORY
FM
AM
VOL
MONO
CITY
TUNED
SORRY
1
M
OPR
OFF
C
S-XBS
AUTO
RANDOM
MEMORY
FM
AM
VOL
MONO
CITY
TUNED
SORRY
1
M
Total number of tracks
Total playing time
Note on CD-R and CD-RW
This unit can play CD-DA format audio CD-R and
CD-RW that have been finalized
§
upon completion
of recording. It may not be able to play some CD-R
or CD-RW due to the condition of the recording.
§
Finalizing is a process that enables CD-R/CD-RW players
to play audio CD-R and CD-RW.
Forward
Backward
(Beep...Beep)
(Beep...Bee...p)
(Beep Beep Beep)
(Beep Beep)
Main unit
Remote control
(Beep)
Main unit
Remote control
Main unit
Remote control
(Beep)
(Beep)
Operation confirmation tones
This tone sounds when a button on the remote con-
trol is pressed. Refer to the parentheses in the illus-
tration for the different types of confirmation tones.
Resume function
Play starts from the beginning of the current track the
next time you press [
1;
] (main unit) or [
∫
/
1
] (remote
control).