20
© Panasonic Industriar Devices SUNX Co., Ltd. 2012 ME-SF4BV2-05
2-3-4 Device Placement
;__"" * ; G
without series or parallel connection between them. It is used for the case that there is a problem in
wiring or for system evaluation in case of addition of equipment. Perform an operation test by refer-
ring to “
2-6-2 Operation Test
.”
Refer to the examples of device placement given below and understand them
thoroughly before installing the devices. Improper sensor placement could
cause device malfunction, which can result in death or serious injury.
If this device is used in multiple sets, arrange them to avoid mutual interference.
If mutual interference occurs, it can result in death or serious injury.
<Example of device placement>
*;<"G* G "%]G"zG
<Reference>
1) Install emitter and the receiver back to back
Receiver
Emitter
Emitter
Receiver
2) Arrange the emitter and the receiver vertically on
opposite sides.
Receiver
Emitter
Emitter
Receiver
3) Arrange the emitter and the receiver horizontally on
opposite sides.
4) Install a barrier
Emitter
Receiver
Barrier
Receiver
Emitter
Emitter
Receiver
Emitter
Receiver