Panasonic SF4B-A12C Скачать руководство пользователя

Страница: 80 / 124

Function

3-8 Functions Using Handy Controller (SFB-HC) (Optional)

This device enables to set each function using the handy controller (

SFB-HC

) (optional). The

settable functions and the factory setting of each function are as follows.

For details, refer to the instruction manual enclosed with the handy controller.

WARNING

Among the functions, the contents related to the safety distance such as the size of the minimum

sensing object are varied depending on the setting condition. When setting each function, re-

calculate the safety distance, and make enough space larger than the calculated safety distance.

Failure to do so might cause the accident that the device cannot stop quickly before reaching the

dangerous area of the device, resulting in the death or serious injury.

●

Fixed blanking function

This function enables to protect the control output (OSSD 1 / 2) from turning into OFF even

though the specific beam channel is blocked.

The factory setting is set to be invalid for the fixed blanking function.

●

Floating blanking function

This function enables to protect the control output (OSSD 1 / 2) from turning into OFF even
though the number of the blocked beam channels are lower than that of the setting beam

channels. 1, 2 or 3 beam channels are settable as the blocking beam channels.

The factory setting is set to be invalid for the floating blanking function.

Both fi xed blanking function and floating blanking function are settable simultaneously.

●

Emission amount control function

The two modes, normal mode and short mode, can be set / changed by controlling the emis-

sion amount. The factory setting is set to the normal mode for the emission amount control

function.

●

Auxiliary output switching function (non-safety output)

The following outputs are switchable as the auxiliary output.

0. Negative logic of the control output (OSSD 1 / 2) (factory setting)

1. Positive logic of the control output (OSSD 1 / 2)

2. For emission: output ON, For non-emission: output OFF

3. For emission: output OFF, For non-emission: output ON

4. For unstable incident light: OFF (Note 1)

5. For unstable incident light: ON (Note 1)

6. For muting: ON

7. For muting: OFF

8. For light reception: ON, For light blocked: OFF (Note 2)

9. For light reception: OFF, For light blocked: ON (Note 2)

Notes: 1) The output cannot be used while the fix blanking function, floating blanking function or the muting func

tion is activated.

2) This device outputs the light received / blocked state under activating the auxiliary output switching

function using the handy controller irrespective of activating other functions: fixed blanking function,

floating blanking function and muting function.

<e.g.>

In case of activating the fixed blanking function, the control output (OSSD 1 / 2) becomes ON with the

shielded object existed in the setting range and other ranges are in light receiving status. If the auxiliary

output switching function activates in No. 8 output, this device becomes OFF because the sensor itself

detects the object.

Ramco National

800-280-6933 | [email protected]

www.panasonicsensors.com

Содержание SF4B-A12C





























































































































Результаты поиска

Содержание SF4B-A12C

Отзывы:

Похожие инструкции для SF4B-A12C

Бренды по названию

Популярные бренды

Panasonic SF4B-A12C, Инструкция по эксплуатации

Результаты поиска

Содержание SF4B-A12C

Отзывы:

Похожие инструкции для SF4B-A12C

Бренды по названию

Популярные бренды