99
English
For moving images: a file will be played for the duration
of the play time of the file.
●
Enter play time using one-byte numeric characters.
●
When playing back large sized files, if you set the
playing back duration short, it may not be played back
properly, for example, noise appears on the screen.
In that case, set the playing back duration longer (10
seconds or longer).
●
If play time for a motion picture longer than the play
time of the motion picture file is specified, the last
image of the file is displayed after the playback of the
motion picture has finished.
Group ID (for Multi Media Player)
It is an ID used for grouping on a network during Multi
Media Player conditions.
GroupID:Gxx :
Group xx
●
The “xx” portion can be set from 01 to 10.
●
Enter a group ID using one-byte alphanumeric
characters.
Note
●
“UTF-8N”: UTF-8 encoding without BOM. Notepad for
windows doesn’t support this encoding.
Please use another editor supported UTF-8 encoding
without BOM.
Playing back the files
■
Example of setting in each mode
Single Media Player (Type 1)
Files will be played in the order in which their names
appear in USB memory.
Scenario, file list and LightID definition file
Scenario:
Unnecessary
File list:
Unnecessary
LightID definition file:
Unnecessary
Setting example
USB memory contents
000_Introduction.jpg
001_Contents_Video1.wmv
002_Contents_Video2.wmv
003_Contents_Video3.wmv
Play contents
For the above setting example, the following contents
will be played on repeat (loop).
1. 000_Introduction.jpg
(
*
1)
2. 001_Contents_Video1.wmv (
*
2)
3. 002_Contents_Video2.wmv (
*
2)
4. 003_Contents_Video3.wmv (
*
2)
*
1: Played for the duration set in [Slide show
duration].
*
2: Played for the duration of the play time of the file.
Single Media Player (Type 2)
Files will be played in the order they were listed in a
scenario.
Scenario, file list and LightID definition file
Scenario:
Enter [File name: Play time].
File list:
Unnecessary
LightID definition file:
Unnecessary
Setting example
USB memory contents
scenario.dat
Introduction.jpg
Contents_Video1.wmv
Contents_Video2.wmv
Contents_Video3.wmv
scenario.dat (scenario)
Introduction.jpg:10
Contents_Video1.wmv:10
Contents_Video2.wmv:20
Contents_Video3.wmv:
Play contents
For the above setting example, the following contents
will be played on repeat (loop).
1. Introduction.jpg
(10 seconds)
2. Contents_Video1.wmv (10 seconds)
3. Contents_Video2.wmv (20 seconds)
4. Contents_Video3.wmv (Played for the duration
of the play time of the
file)
Single Media Player (Type 3)
Files will be played in the order they were listed in a
scenario.
Scenario, file list and LightID definition file
Scenario:
Enter [File definition: Play time].
File list:
Enter [File definition: File name].
LightID definition file:
Unnecessary
