89
English
Basic control page
Click [Display control
] → [
Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
Detail control page
Click [Display control
] → [
Advanced control].
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
●
After the settings are changed, it may take a while till
the display status is displayed.
Change Use name / Password page
Click [Change password].
1
2
Select [Administrator].
Select [User].
■
About [Administrator]
1
2
3
4
5
6
7
Account
Current user name input field
Current password input field
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
Note
●
If this unit has already been registered to application
software such as “Multi Monitoring & Control
Software” that uses communication control via LAN,
changing an “Administrator” user name or password
will disable the communication with this unit. If the
“Administrator” user name or password is changed,
update the registration information of applicable
application software.
