Section 700 - Operation
Chapter 4. User Maintenance
ICX-35-700
ICX (International), March/1999
95
Considerations
•
N/A
Set Send Text Messages
Description
You can send a text message to a key telephone with a display when you are sending call waiting
signal (Auto camp-on or manual camp-on). This menu item specifies the text messages that may be
sent.
Operation
To set Send Text Messages using either a large-display or small-display phone:
Action
Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the 81 level, enter 11.
3. Press the HOLD key.
8111-
Text Message
displays
4. Enter 0.
5. Press the HOLD key.
8111-0:
Send Message
displays
6. Press the HOLD key.
Enter Msg #
displays
7. Enter the Message number (0-9).
8. Press the HOLD key.
A B C D E F
X
displays (where X = Send Text Message
number)
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.