90
ICX (International), March/1999
ICX-35-700
Chapter 4. User Maintenance
Section 700 - Operation
Hardware Requirements
•
N/A
4. Enter 1.
5. Press the HOLD key.
1
:
PSD Name
displays
6. Press the HOLD key.
EXT Number
displays
7. Dial the extension number.
8. Press the HOLD key.
Enter PSD # XXX
displays (where
XXX = dialled extension number)
9. Enter the PSD bin number (80-99).
10. Press the HOLD key.
A B C D E F PXX
displays (where
PXX = PSD number)
11. Enter the PSD name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
12. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
13. Repeat steps 11-12 as many times as necessary to enter the
desired speed dial name.
Note: Press the FL/R key to clear the entire entry.
14. Press the HOLD key to store the entry.
Next PSD bin number displays
15. To set additional PSD names, press the volume up and
down key or press the HOLD key to move to the desired
PSD.
Desired PSD bin number displays
16. Repeat steps 11-15 until all PSD names are entered.
17. Press the MEMORY key to exit the PSD name entry
mode.
Enter PSD # XXX
displays (where
XXX = extension number)
18. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF LED goes off
Action
Result