73
VQT0T60
To display the on-screen information on the TV
The information displayed on the LCD monitor (operation icon and mode indication,
etc.), date and time (P29) can be displayed on the TV.
Press the [OSD] button on the remote
control.
≥
Press the button again to erase the OSD
information.
≥
The LCD monitor display does not change.
To prevent accidental deleting of images recorded, or when the SD card is full, record
the files on the SD card to the DVD recorder’s hard disk or DVD-RAM.
Depending on the type of DVD recorder used, it may not be possible to copy motion
pictures (MPEG2) recorded with this unit onto a hard disk, etc.
≥
For further details, refer to the operating instructions of the DVD recorder.
1
Remove the SD card with the
recorded images from this unit. (P15)
≥
Set this unit’s power switch to [OFF] then
remove the SD card from it.
2
Insert the SD card into the DVD
recorder’s SD card slot.
≥
For details on how to record the images onto
the hard disk, refer to the operating
instructions of the DVD recorder.
OSD
DATE/
TIME
START/
STOP
Using this unit’s recorded data on other devices
This is for copying recordings from a DVD recorder’s SD card slot
onto its hard disk.
≥
The images recorded on the hard disk or DVD-RAM are converted to the
DVD
video
recording format. Once converted, you cannot copy them at high speed onto a DVD-R
or copy them onto an SD card using the MPEG2 format.
VQT0T60_EB.book 73 ページ ２００５年８月２４日 水曜日 午後１時５７分
