20
VQT0T60
To cancel quick start
Press the menu button, use the cursor button to select [
SETUP]
#
[
QUICK START]
#
[OFF]. (P27)
Turning the unit on/off (continued)
≥
To cancel quick start standby, turn off the
power.
≥
Quick start standby is cancelled after
5 minutes have elapsed.
In this case, the unit cannot be
quick-started and it takes longer for it to
start operating.
≥
Quick start standby is cancelled if the
mode dial is switched to a mode other
than motion picture recording mode or
still picture recording mode.
≥
Since about half the power of normal
recording is used in quick start standby,
using quick start reduces the recordable
time.
≥
If quick start is not set, it takes longer for
this unit to start operating, but the
amount of power consumed when the
LCD monitor is closed is reduced.
≥
When the LCD monitor is opened in
quick start standby status, the zoom
magnification is set to the 1
k
(approximately). This may cause the size
of the image to be different from the size
before standby status was established.
≥
When this unit is quick-started with the
white balance on automatic, it may take
some time until the white balance is
adjusted if the scene being recorded has
a light source different from the scene
last recorded. (When the colour night
view function is used, however, the white
balance of the scene last recorded is
retained.)
VQT0T60_EB.book 20 ページ ２００５年８月２４日 水曜日 午後１時５７分
