57
VQT0T60
You can record still pictures on an SD card using the timer.
¬
Rotate the mode dial to select
.
1
Press the button in the centre to
display the icon shown in the figure.
2
Press the cursor button left to select
the [
Ø
] self-timer icon.
The [
Ø
10
] icon flashes orange, then lights white.
≥
Each time the left cursor button is pressed, the
indication changes by one setting in the
following order: [
Ø
10
]
>
[
Ø
2
]
>
setting
cancelled.
–
Ø
10
: Starts recording after 10 seconds
–
Ø
2
: Starts recording after 2 seconds
3
Press the record button.
After the indication lamp and the [
Ø
10
] or [
Ø
2
]
indication flash for the time which has been set,
recording will start. After recording, the self-timer
is cancelled.
1
Indication lamp
≥
When the record button is pressed halfway
and then all the way, the subject will be
brought into focus when the record button was
pressed halfway.
≥
When the record button is pressed all the way
at once, the subject will be focused just before
the recording.
To stop the timer midway through
Press the [MENU] button. (The self-timer setting is cancelled.)
Self-timer recording
This is for recording using the timer.
1
≥
By operating the [ON/OFF] switch or
mode dial, the self-timer standby mode is
cancelled.
≥
Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
≥
Setting the self-timer to [
Ø
2
] is a good
way to prevent image shake when the
record button is pressed while using a
tripod etc.
VQT0T60_EB.book 57 ページ ２００５年８月２４日 水曜日 午後１時５７分
