Recording
36
LSQT1211
Recording motion pictures
[HDD]
[SD]
This unit can be used for recording motion pictures to the internal HDD and an SD card. (
l
16) Before
recording, use the menu to select the recording destination. (
l
below)
When the unit is turned on for the first time, the media select screen for recording motion pictures will
appear. Select [HDD] or [SD CARD] and press the joystick.
≥
When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a
wide-screen TV.
To watch images on a regular TV (4:3), change the aspect ratio setting (
l
49) before recording the
images or when watching them on the connected TV (
l
72).
≥
(SDR-H250) Open the lens cover before turning the unit on.
If the unit is turned on with the lens cover closed, the automatic white balance adjustment may not
function properly.
≥
(SDR-H20) Remove the lens cap before turning the unit on.
If the unit is turned on with the lens cap attached, the automatic white balance adjustment may not
function properly.
1
Turn the unit on.
2
Rotate the mode dial to select
.
3
Open the LCD monitor.
4
Press the MENU button, then select [MEDIA SELECT]
#
[HDD] or [SD
CARD] to select the recording destination and press the joystick.
5
Press the recording start/stop
button to start recording.
LSQT1211(PAL_ENG).book 36 ページ 2007年2月13日 火曜日 午後1時14分