15
Baking Brioche
1
4
2, 3
Bread flour
400
g
Salt
1 tsp
Sugar
3 tbsp
Butter (Cut into 2 cm cubes and keep in
refrigerator)
50
g
Powdered milk
2 tbsp
Eggs (Medium)
2 (100
g
)
Water
180 mL
Dry yeast
1½ tsp
* Butter for added later (Cut into 1–2 cm
cubes and keep in refrigerator)
70
g
• For addition of ingredients with*, follow programming
instructions below.
Preparations
(P. 12)
➀
Cut the butter for adding later for 1–2 cm cubes and keep them in refrigerator.
➁
Set the kneading blade into the bread pan.
➂
Place the ingredients in the bread pan in the order listed in the recipe.
➃
Set the bread pan into the main unit, and plug the machine into the socket.
1
Select menu ‘13’
[Simple way to bake brioche]
Add butter with other
ingredients at the beginning.
z
Cut the butter into 2 cm cubes and place them
into the bread pan at the same time as the other
ingredients.
z
Follow the steps shown on the left. However,
when the machine beeps on step 3 to add extra
butter, please leave as it is.
z
Time required for completion is 3 hrs 30 minutes.
* When butter is added at the beginning, flavour,
texture and rising of bread are a little different from
the time bread is baked with extra butter added in
later.
z
A ‘Rest’ process will begin immediately after
starting, followed by ‘Knead’ and ‘Rise’.
2
Start the machine
Time until adding the extra butter or ingredients
O
The start light will come on.
3
Add additional butter when the beep
sounds, then press ‘Start’ again
Complete placing the additional cubed butter while ‘
’ is flashing.
After the Start
pad is pressed
Display indicates remaining time until completion of the programme
O
When adding extra ingredients such as raisins,
add them with the butter. (Use max. 150
g
for
ingredients)
O
Even without pressing the Start pad, kneading
will continue after 5 min. It does not continue
kneading immediately, even if the Start pad is
pressed after adding butter or ingredients.
O
Do not add butter after display shows remaining
time. (P. 49)
4
Press ‘Stop’ and remove bread
when machine beeps 8 times and the bar at ‘End’ flashes
O
The flashing start light will go off.
How to Use