Panasonic SCPM25 - CD STEREO SYSTEM, Руководство по эксплуатации

Страница: 22 / 28

RQT5717
22
Timers and others
B
C
A
SLEEP
SLEEP
1 2 3
4 5 6
7 9 0
10
CANCEL
AUTO OFF SLEEP
8
PROGRAM TUNE MODE PLAY MODE
VOLUME
DISPLAY DIMMER MUTING
SOUND
VIRTUALIZER
REV MODE
SELECTOR TAPE TUNER CD
CLOCK
TIMER
PLAY
REC
REW CLEAR FF
BASS TREBLE
PLAY/
REC
1 2 3
4 5 6
7 9 0
10
CANCEL
AUTO OFF SLEEP
8
PROGRAM TUNE MODE PLAY MODE
VOLUME
DISPLAY DIMMER MUTING
SOUND
VIRTUALIZER
REV MODE
SELECTOR TAPE TUNER CD
CLOCK
TIMER
PLAY
REC
REW CLEAR FF
BASS TREBLE
1 2 3
4 5 6
7 9 0
10
CANCEL
AUTO OFF SLEEP
8
PROGRAM TUNE MODE PLAY MODE
VOLUME
DISPLAY DIMMER MUTING
SOUND
VIRTUALIZER
REV MODE
SELECTOR TAPE TUNER CD
CLOCK
TIMER
PLAY
REC
REW CLEAR FF
BASS TREBLE
CLOCK /
TIMER
PLAY/
REC
OFF PLAY ON SLEEP
FADER
Using the timers
A
Using the play/record timer
by remote control only
Checking the timers
Press [CLOCK/ TIMER].
(While the unit is on, press [CLOCK/ TIMER] to select “
˚ ˚ ˚ ˚ ˚ PLAY” or
“ ˚ ˚ ˚ ˚ ˚ REC”.)
The timer conditions are shown in the following order.
start time
→
finish time
→
source
→
volume (Play timer only)
Playing the unit after the timers are set
The unit can be used after the timers are set.
Check the following before turning the unit off again.
If playing tapes or making a recording:
Reset tape direction.
If playing disc:
Make sure the desired disc is selected.
Note
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in the
standby mode.
• If AUX is selected as the source, when the timer comes on, the
system turns on and engages AUX as the source. If you want to
playback or record from a connected unit, set the other unit’s timer
to the same time. (See the other unit’s instruction manual.)
B
Using the sleep timer
by remote control only
This timer turns the unit off after a set time.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
90 30 60 120
OFF
To cancel the sleep timer
Press [SLEEP] to select “OFF”.
To confirm the remaining time
(only while unit is ON)
Press [SLEEP].
To change the time remaining during operation
Press [SLEEP] to show the remaining time, and then press [SLEEP]
to select the desired time.
Notes
The play and sleep timer or the record and sleep timer can be used
together.
The sleep timer always has priority. Be sure not to overlap timer
settings.
C
The Timer Fader
by remote control only
Volume increases slowly to the set level when the play timer turns
the unit on and decreases slowly when the sleep timer turns the unit
off.
Press and hold [
˚ ˚ ˚ ˚ ˚
PLAY/REC] to display
“
FADER
”.
(All timers will be affected.)
Press and hold again to cancel.
Note
This feature does not affect record timer’s recordings.
e20-22 1/17/01, 7:09 PM 22