39
RQT7921
Panasonic video cassette recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
≥
Use “1”, the factory preset, under normal circumstances.
1
While OPTION menu is displayed
Press [
3 4
] to select the “REMOTE
CONTROL”.
2
Press [
2 1
] to select the code (1 or 2)
and press [MENU].
The remote control code on the unit has been set.
3
While pressing [ENTER] on the remote
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
When the remote control code on the remote is set, “REMOTE”
indication (
l
below) disappears.
The following is displayed for a few seconds on the main unit when you
use a remote control with the different code.
The unit’s remote control code
Change its code to match the unit’s
(
l
step 3).
When a stereo and/or SAP broadcast is received, “STEREO” and/or
“SAP” appear showing the type of broadcast.
To change the audio
Press [SHIFT]
i
[AUDIO].
The audio changes as follows:
≥
When playing a tape:
LR
>
L
>
R
>
Monaural audio track
^""""""""-""""b
≥
While watching the television:
LR
>
L
>
R
^"""-"b
The table below shows the TV broadcast type, “MTS” settings, and
audio recording patterns.
Be sure that “MTS” is set to “MAIN” or “SAP” to record on the Hi-Fi
audio tracks.
[Note]
≥
Switch to “MONO” for viewing or recording if a stereo or SAP
broadcast is impaired by poor reception.
≥
To resume stereophonic recording, set “MTS” to “MAIN” or “SAP”.
When you play back recordings of stereo or SAP broadcasts, these
audio types are automatically selected. The unit may select a different
type if you start play midway through the program. Press
[SHIFT]
i
[AUDIO] to change the type if this occurs.
This function does not work if:
– The tape was recorded on a deck without this system.
– The tape is a recording from external equipment.
REMOTE CONTROL
Changing audio
TV
broadcast
MTS
setting
Audio track
Normal
(Mono)
Hi-Fi
Left
Right
Mono
MAIN or
SAP
Mono
Mono
Mono
Stereo
MAIN or
SAP
L
i
R
(Mixed)
Left
Right
Mono and
SAP
MAIN
Mono
Mono
Mono
SAP
Mono
Mono
SAP
Stereo and
SAP
MAIN
L
i
R
(Mixed)
Left
Right
SAP
L
i
R
(Mixed)
L
i
R
(Mixed)
SAP
Auto bilingual choice function
SHIFT
CANCEL
AUDIO
r
[Remember]
Press [VHS] first.
RQT7921-P_ENG.book 39 ページ 2005年5月25日 水曜日 午後3時24分