37
RQT8979
Adjusting the bass
• You can adjust the bass
through this operation.
1 Select and confirm the choice.
2 Make adjustment and confirm the choice.
Adjustment range:
-10
dB to
+10
dB
Factory setting:
0
dB
Adjusting the treble
• You can adjust the treble
through this operation.
1 Select and confirm the choice.
2 Make adjustment and confirm the choice.
Adjustment range:
-10
dB to
+10
dB
Factory setting:
0
dB
Balancing front speaker
volumes
• You can adjust the balance
of the front speakers.
1 Select and confirm the choice.
2 Make adjustment and confirm the choice.
L
: Front left
R
: Front right
You cannot adjust volume balance when you use SFC’s “
PARTY
” mode (
á
pages 30 and 31).
Changing the audio
output (Dual program)
• The unit allows you to
switch dual audio signals in
Dolby Digital and DTS
formats.
“
DUAL PRG
” appears on the display when the unit receives dual audio signals.
1 Select and confirm the choice.
2 Select audio and confirm the choice.
MAIN
:
Main audio output
SAP
:
Sub channel audio output
M+S
:
Main and sub channel audio output
Factory setting:
MAIN
Adjusting the
brightness of the
display
• Dim the display for better
viewing in a darkened room.
1 Select and confirm the choice.
2 Select a setting and confirm the choice.
• Select “
DIMMER OFF
” to cancel.
• When you select “
DIMMER 1
” to “
DIMMER 3
”, the light
above [INPUT SELECTOR] and [VOLUME] goes off.
Adjustment range:
DIMMER 1
(bright) to
DIMMER 3
(dim)
Factory setting:
OFF
Sleep timer
• The sleep timer can turn the
unit off after a set time.
1 Select and confirm the choice.
2 Select the time and confirm the choice.
• When this is set, “
SLEEP
” appears on the display.
• To check the setting:
After setting the time, you can check the remaining time
using step
1
.
• To change a setting:
Repeat the procedure from the beginning.
Times available for setting:
30, 60, 90, 120
(minutes)
Factory setting:
OFF
Sleep timer is for this unit only.
The bar shows the standard balance.
Note
Note
Sound effects/C
onvenient functions
Operations
