11
RQT8979
4
Fix the speaker cables.
Press the speaker cables into the cable groove
provided in the stand.
The speaker cables must have a thickness of 3.0 mm
(1/8'') or less to fit into the cable groove.
Cable groove
When using speaker cables that are thicker than
3.0 mm (1/8''), attach nylon clampers to the
speakers and use them to fix the cables.
Example:
Nylon clamp (included)
Screw for nylon clamp (included)
Speaker cables
Repeat steps 1 to 4 and assemble the front
speaker L and surround speaker R.
Attaching a stabilizing wire
Example:
Remove the cover
Wire (not included)
Ring (not included)
Screw (not included)
The wall on which the speakers are to be mounted and the
screws
(not included)
used for installing the speakers must be
strong enough to support a weight of at least 65 k
g
(143 lb.).
Consult the contractor in charge of the work.
※
A screw which is at least 35 mm (1-13/32'') long is used when
installing the speaker on a wooden post or pillar. In all other
cases, use a screw which is strong enough to support a weight
of at least 65 k
g
(143 lb.).
&RONTSPEAKER
3URROUNDSPEAKER
ø7.0 to 9.4 mm
(9/32
" to 12/32")
ø4 mm
(3/16
")
Preparation
s
Assemb
ly
and Installation
