Discs — Convenient functions
RQT8169
14
Discs — Convenient functions
CD MODE
DISC
REPEAT
ANGLE/PAGE
A.DISC REVIEW,
PLAY SPEED
AUDIO
QUICK OSD
Numbered
buttons
SUBTITLE
MANUAL SKIP,
QUICK REPLAY
SHIFT
, DVD/CD
RETURN,
ZOOM
,
Reviewing titles to play (ADVANCED
DISC REVIEW)
RAM
DVD-V
(R/+RW)
Allows you to browse the disc contents and start playing from the
selected position. You can select either “Intro Mode” or “Interval Mode”
in “Advanced Disc Review” in the “Disc” tab (
A
page 20).
1
Press [A.DISC REVIEW].
The QUICK OSD screen is displayed.
e.g.
RAM
2
Press [
:
, DVD/CD] when you find a title/program to
play.
This may not work depending on the disc and the play condition.
CD sequential play (CD MODE)
VCD
CD
WMA
MP3
This feature is very convenient if you want to play several music CDs
sequentially. Make sure that the applicable disc is in the play position
before playing.
DVD and JPEG are skipped without being played.
While stopped
1
Press [CD MODE].
2
Press [
:
, DVD/CD].
Note
•
If the disc in the play position is not applicable (e.g. DVD), CD Mode
does not work.
•
HighMAT menus and Video CD playback control are disabled.
•
You cannot change the mode during play, or while in program or
random mode.
•
If you want to play a DVD, press [CD MODE] again to cancel CD
Mode. (CD Mode is also canceled when you open the current disc
tray, switch the unit to standby or select another source.)
Quick replay
(Only when the elapsed play time can be displayed.)
(R/+RW)
Press [SHIFT] + [QUICK REPLAY] to skip back a few
seconds.
Skipping 30 seconds forward
(Only when the elapsed play time can be displayed.)
RAM
DVD-V
(R/+RW)
Play restarts from approximately 30 seconds later. Convenient when
you want to skip commercials etc.
During play
Press [MANUAL SKIP].
RAM
It is not possible to skip through the current program if the start
of the next program is within about 30 seconds of the point you are
skipping from.
Chapter
Time
4
Title
1
0:41:23
Program Playback
Current playback number
Playback
condition
Play mode
Current position
Elapsed play time
Disc information
You can select the disc after checking the discs loaded with the Disc
information screen.
•
You can also select the disc directly with the disc buttons on the main
unit.
1
Press [DISC] to show the Disc information screen.
2
Press the numbered buttons ([1]–[5]) to select the disc.
To clear the screen
Press [DISC].
Displaying current playback condition
(QUICK OSD)
The current playback condition is displayed.
Press [QUICK OSD].
e.g.
DVD-V
•
To exit the screen
Press [QUICK OSD].
•
CD
MP3
WMA
The QUICK OSD screen will appear automatically.
Program
Time
4
0:01:06
04
e.g.
Disc Information
CD
DVD-VR
Unchecked
No Disc
DVD-Video
Track 10
Time 60:15
Empty
Not yet read
RQT8169(14_16)new1
4/20/05, 11:30 AM
14
