6
TQ
BJ
20
15
6
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the unit if they are the same.
A
Standby/on switch
[
`
],
[
1
]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
B
Select the audio source
On the unit:
To start Bluetooth
®
pairing, press and hold [
].
C
Basic playback control
D
View the setup menu
E
View the content information
F
Select or confirm the option
G
Open or close the disc tray
H
Decrease the brightness of the display panel
The illumination is also switched off.
To cancel, press the button again.
I
Adjust the volume level
J
Mute the sound
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
K
View the play menu
L
Select the sound effects
M
Select the jukebox
N
USB port (
)
O
Disc tray
P
Display panel
Q
Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down,
30° left and right
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
UA3.4E_TQBJ2015.book Page 6 Wednesday, June 7, 2017 3:28 PM
