12
TQBS0132
Change the Bluetooth
®
connection link mode to suit the
connection type. You can switch to Mode 2 (priority on
sound quality) or Mode 1 (priority on connectivity) by
following the steps below.
1
Press [ ] to select “ ”.
≥
Turn off the connection of your device in advance.
2
While pressing
and holding
[DIMMER] on the
remote control,
press and hold [VOL
s
] on this system for
more than 4 sec.
≥
The current mode will be indicated by the
corresponding LED indicator.
3
While the current mode is indicated (about
10 sec), press [DIMMER] again.
≥
The setting changes each time [DIMMER] is pressed.
≥
The indicator for the selected setting blinks for 10 sec and
then exits the setting mode.
≥
The setting is maintained until it is changed again.
≥
Default setting of this function is "Mode 2".
You can turn off VIERA Link when, for example, operation
becomes unstable while a non-Panasonic HDMI-
compatible device is connected.
While pressing and holding [MUTE] on the
remote control, press and hold [VOL
s
] on this
system for more than 4 sec.
≥
All the indicators will blink once when the volume limitation
is turned off.
≥
When VIERA Link (HDMI) is turned off, the ARC function
becomes unavailable. To select the TV as the source, be
sure to connect a stereo mini plug audio cable (not
supplied).
≥
To reset the setting, return to the factory preset. (
>
13)
≥
Default setting of this function is “On”.
You can switch the AUX input mode (TV/Music) by
following the steps below. Select the “TV” mode to
connect to the TV, or select the “Music” mode to connect
to a music device, etc.
1
While pressing
and holding
[INPUT] on the
remote control,
press and hold [VOL
s
] on this system for
more than 4 sec.
≥
The current mode will be indicated by the
corresponding LED indicator.
2
While the current mode is indicated (about
20 sec), press [INPUT] again.
≥
The setting changes each time [INPUT] is pressed.
≥
The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥
Default setting of this function is “TV” mode.
When other Panasonic devices respond to this system’s
remote control, change the remote control code on this
system and the remote control.
Preparation
≥
Turn off all other Panasonic products.
≥
Turn on this system.
Change the remote control code to code 2:
1
Aim the remote control at this system’s remote
control sensor.
2
Press and hold [MUTE] and [VOL
s
] on the
remote control for more than 4 sec.
≥
All the indicators will blink for 10 sec when the code of
this system is changed.
≥
To change the remote control code to code 1, repeat the
steps above, but replace [VOL
s
]
with [VOL
i
].
If a state of the lowered volume disturbs you every time
this system turns on, for example, it is possible to turn off
this function as follows:
While pressing and holding [MUTE] on the
remote control, press and hold [VOL
i
] on this
system for more than 4 sec.
≥
All the indicators will blink once when the volume limitation
is turned off.
≥
Default setting of this function is “On”.
≥
To reset the setting, return to the factory preset. (
>
13)
Switching the Bluetooth
®
communication mode
Turning off VIERA Link (HDMI)
(HDAVI Control
TM
)
“Mode 1”
“Mode 2”
Switching the AUX input mode
Remote control code
Turning off the volume
limitation
“TV”
“Music”
(12)
SC-SB1_EG_TQBS0132.book 12 ページ ２０１７年４月２１日 金曜日 午後３時３２分
