SOFT
For background music
CLEAR
Clarifies higher frequencies
VOCAL
Adds gloss to vocal
FLAT
Cancels the sound effect
Note:
• If you set Preset EQ and then adjust BASS and TREBLE .
Preset EQ will be cancelled.
D.BASS
<
This function lets you enjoy a powerful Pass effect.
Press [D .BASS] to se lect “ ON D .BASS” o r “ OFF
D.BASS” .
Clock and tim ers
Setting the clock
This is a 24-hour clock.
Using c lo c k inform a tio n from a n etw o rk device
You can stream the clock information from the device to
this unit by using the app “Panasonic Music Control” .
Preparation
• Complete the network settings. (=> 6)
• Install the app Panasonic Music Control” on your
device.
• Connect your device to the same network as this
system.
1
Turn th is system on.
• Check that the network LED (blue) is lighted on the main unit.
• If it is not indicated, check the network settings. (i> 6)
2
Start the app “ P anasonic Music C o n tro l” .
• Always use the latest version of the app
• The clock information will be sent to this system.
A d ju stin g th e clock m anually
1
Press [CLOCK/TIMER] to se lect “ CLO CK” .
2 Press [ A , T ] to set th e tim e and th en press [О К ].
To check th e tim e
Press [CLOCK/TIMER],
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to s e le ct the setting (in
m inutes).
“SLEEP 30” ------- » “SLEEP 6 0 "------- » “SLEEP 90”
1------“ OFF” (Cancel) * *—“ SLEEP 1 20 "-------
To show the rem aining tim e
Press [SLEEP],
Note:
• The remaining time is indicated on the unit’s display at
every minute except when other operations are performed
“SLEEP 1" is always shown when only 1 minute remains
• The sleep timer can be used together with the play timer
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
“ TIMER A D J” .
2
P ress [ A , ▼ ] to se t the sta rtin g tim e (“ ON
тім
E” )
and then press [О К].
3
P ress [ * . ▼ ] to se t the fin is h in g time
(“ OFF TIME” ) and then press [О К].
4
P ress
[A ,
▼] to se le ct the m u sic source* and
then press [ОК].
Turning th e tim e r on
1
Prepare the selected m usic so urce and set th e
desired volum e.
2
P ress [® , PLAY],
“© ” is shown.
To cancel, press [Ѳ, PLAY] again.
The system must be switched o ff for the timer to
operate.
MULCT.
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and switch on again while a
tinier is in operation, the timer will not stop at the end time.
"CD', “USB'. "DAB+'. and "FM" can be set as the music
source. You can also set a favourite (FAV) that has been
registered with [FAV].
Firm w are updates
Occasionally, Panasonic may release updated firmware
for this system that may add or improve the way a
feature operates. These updates are available free of
charge.
D ow nloading takes approx. 20 m inutes.
Do n ot d isco n n e ct th e AC m a in s lead or
turn th is system to standby w hile
updating
- The progress is displayed as “UPDATING” or
“UPD □□ % ” while updating, f □ " stands for
a number.)
Note:
• Due to measure to solve security issues, etc., there are
times v/hen operations (timers, etc.) on this system are
forcibly stopped and the firmware is updated. If you do
not want the firmware forcibly updated, disconnect the
LAN cable or disconnect from the wireless network.
• During the update process, no other operations can be
performed,
• If there are no updates, “NO NEED” is displayed.
• Updating the firmware may reset the settings of this
unit.
• Downloading takes a maximum of approx. 20 minutes.
It may take longer or may not work properly depending
on the connection environment.
-
ь
T
O
B
M
0
7
3
6
