7
V
QT
5
J67
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
• Press [SELECTOR] repeatedly to select “BLUETOOTH”.
• If a Bluetooth
®
device is already connected, disconnect it.
1
Press [PLAY MENU] repeatedly to select
“Link Mode”.
2
Press [
2
,
1
] to select the mode and then press [OK].
Mode 1: Emphasis on connectivity
Mode 2: Emphasis on sound quality
If the sound input level of the Bluetooth
®
transmission is too
low, change the input level setting.
Preparation
• Connect a Bluetooth
®
device.
1
Press [PLAY MENU] repeatedly to select “Input Level”.
2
Press [
2
,
1
] to select the level and then press [OK].
“Level 0”
,.
“Level
i
1”
,.
“Level
i
2”
^-----------------------------------------J
Note:
• Select “Level 0” if the sound is distorted.
1
While a Bluetooth
®
device is connected:
Press [PLAY MENU] to select “Disconnect?”.
2
Press [
2
,
1
] to select “OK? Yes” and then press [OK].
About Bluetooth
®
Frequency band used
• This system uses the 2.4 GHz frequency band.
Certification of this device
• This system conforms to frequency restrictions and has
received certification based on frequency laws. Thus, a
wireless permit is not necessary.
• The actions below are punishable by law in some
countries:
- Taking apart or modifying this system.
- Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
®
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth
SIG, Inc.
• Depending on the specifications and settings of a device, it
can fail to connect or some operations can be different.
• This system supports Bluetooth
®
security features. But
depending on the operating environment and/or settings,
this security is possibly not sufficient. Transmit data
wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
®
device.
Range of use
• Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment,
obstacles or interference.
Interference from other devices
• This system may not function properly and troubles such
as noise and sound jumps may arise due to radio wave
interference if this system is located too close to other
Bluetooth
®
devices or the devices that use the 2.4 GHz
band.
• This system may not function properly if radio waves from a
nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc.).
Media Playback operations
The following marks indicate the availability of the feature.
Preparation
• Turn the unit on.
• Insert the media or connect the Bluetooth
®
device.
• Press [CD], [iPod] or [SELECTOR] to select the audio
source.
Note:
• Depending on the model (e.g., iPod nano 7th generation,
etc.), it may be necessary to select the album, artist, etc. on
the iPod/iPhone.
• Operation results may vary depending on the iPod/iPhone/
iPad models.
Bluetooth
®
transmission mode
• The default setting is “Mode 2”.
• To enjoy a higher sound quality, select “Mode 2”.
Bluetooth
®
input level
Disconnecting a Bluetooth
®
device
Panasonic bears no responsibility for data and/or
information that is compromised during a wireless
transmission.
:
CD audio in CD-DA format and a CD that
contains MP3 files
:
Compatible iPod/iPhone/iPad
:
USB devices containing MP3 files
:
Connected Bluetooth
®
device
Basic play
[CD]
[iPod]
[USB]
[Bluetooth]
Play
Press [
1
/
;
].
Stop
Press [
∫
].
•
: The position is memorised and
“Resume” is displayed.
•
: Press [
∫
] two times to stop the
playback fully.
Pause
Press [
1
/
;
].
Press again to continue playback.
Skip
Press [
:
] or [
9
] to skip track.
(main unit: [
:
/
6
] or [
5
/
9
])
: Press [
3
] or [
4
] to skip the
MP3 album.
Search
During play or pause
Press and hold [
6
] or [
5
].
(main unit: [
:
/
6
] or [
5
/
9
])
•
: Backwards search is only within
the current track.
View iPod menu
Press [iPod MENU].
Select an item
Press [
3
,
4
] and then press [OK].
SC-PMX7PC-VQT5J67_mst.book 7 ページ ２０１４年４月１７日 木曜日 午後２時１２分