V
QT
5
J67
6
“iPod_Dock” (Using Lightning connector):
• Make sure that the iPod/iPhone is fully inserted and its
back is resting against the cushion pad.
• Make sure to remove the iPod/iPhone from its case.
• Make sure to align your iPod/iPhone with the connector
when inserting.
“iPod_Port”:
• Use the dedicated USB cable (not supplied) for iPod/
iPhone/iPad.
• Insert the USB device directly. Do not use any USB
extension cable.
• Before removing the USB device, select a source other
than “USB”.
Disc tray:
• Remove the CD only after it stops rotating.
Charging starts when an iPod/iPhone/iPad is connected to
this system.
• During standby mode, charging will not start from the
“iPod_Port” connection, however it will start as usual from
the “iPod_Dock” connection.
- To charge from the “iPod_Port” connection, start the
charging before turning this unit to standby mode.
• See the iPod/iPhone/iPad display for its battery charging
status.
• Disconnect the iPod/iPhone/iPad if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.
Media information
• Please be aware that Panasonic accepts no responsibility
for the loss of data and/or information.
Compatible with “iPod_Dock” connection
(Using Lightning connector)
Compatible with “iPod_Port” connection
[Using dedicated USB cable (not supplied)]
(as of January 2013)
Note:
• Compatibility depends on the software version. Update
your iPod/iPhone/iPad to the latest software before using it
with this unit.
• Read the User Guide of the iPod/iPhone/iPad for the
operating instructions.
• USB devices that support bulk-only transfer.
• USB devices that support USB 2.0 full speed.
Note:
• Files are defined as tracks and folders are defined as
albums.
• Track must have the extension “.mp3” or “.MP3”.
• This system can access up to:
- 255 albums (including root folder)
- 2500 tracks
- 999 tracks in one album
• CBI (Control/Bulk/Interrupt) is not supported.
• Some files can fail to work because of the sector size.
• NTFS file system is not supported (only FAT12/FAT16/
FAT32 file system is supported).
• This system can play CD-R/RW with CD-DA or MP3 format
content.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Note:
• Some CD-R/RW cannot be played because of the
condition of the recording.
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums (including root folder) and
20 sessions
• Recordings will not necessarily be played in the order you
recorded them.
Bluetooth
®
operations
By using the Bluetooth
®
connection, you can listen to the sound
from the Bluetooth
®
audio device from this system wirelessly.
Refer to the operating instructions of the Bluetooth
®
device
for details.
Preparation
• Turn on the Bluetooth
®
feature of the device and place the
device near this system.
• If this system is already connected to a Bluetooth
®
device,
disconnect it.
1
Press [SELECTOR] repeatedly to select
“BLUETOOTH”.
If “Pairing” is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select “New Device” and then
press [OK].
“Pairing” is indicated on the display.
3
Select “SC-PMX7” from the Bluetooth
®
device’s
Bluetooth
®
menu.
4
Start play on the Bluetooth
®
device.
Note:
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Preparation
• Turn on the Bluetooth
®
feature of the device and place the
device near the speaker unit.
• If this system is already connected to a Bluetooth
®
device,
disconnect it.
1
Press [SELECTOR] repeatedly to select “BLUETOOTH”.
“Ready” is indicated on the display.
2
Select “SC-PMX7” from the Bluetooth
®
device’s
Bluetooth
®
menu.
The name of the connected device is indicated on the
display for 2 seconds.
3
Start play on the Bluetooth
®
device.
Note:
• This system can only be connected to one device at a time.
• When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth
®
device.
• The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
Charging an iPod/iPhone/iPad
Compatible iPod/iPhone/iPad
iPhone 5
iPod touch
(5th generation)
iPod nano
(7th generation)
iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS /
iPhone 3G / iPhone
iPad
(3rd, and 4th generation)
/ iPad 2 / iPad / iPad mini
iPod touch
1st, 2nd, 3rd, 4th, and 5th generation
iPod nano
2nd, 3rd, 4th, 5th, 6th, and 7th generation
Compatible USB devices
Compatible CD
Pairing Bluetooth
®
devices
Connecting a paired Bluetooth
®
device
SC-PMX7PC-VQT5J67_mst.book 6 ページ ２０１４年４月１７日 木曜日 午後２時１２分