Panasonic SC-PM200, Руководство по эксплуатации

Страница: 7 / 64

ENGLISH ENGLISH
RQT9547
7
7
USB
You can connect and play MP3 tracks from your USB
mass storage device.
Do not use a USB extension cable. The system cannot
recognise USB mass storage device connected through
a cable.
1
Decrease the volume and connect the USB mass
storage device to the USB port.
2
Press [USB] and then press [
4
/
9
] to start
playback.
Stop
playback Press [
8
] during playback.
“RESUME” is shown.
Press [
4
/
9
] to continue playback from the
start of the track.
OR
Press [
8
] two times to stop the playback
fully.
For other operations, refer to “Discs” (
Z
6).
Compatible devices
• USB mass storage devices that support bulk-only
transfer.
• USB mass storage devices that support USB 2.0 full
speed.
Supported format
• Folders are defined as album.
• Files are defined as track.
• Track must have the extension “.mp3” or “.MP3”.
• CBI (Control/Bulk/Interrupt) is not supported.
• NTFS file system is not supported (only FAT 12/16/32 file
system is supported).
• Some files can fail to work because of the sector size.
Note:
• Maximum album: 255 albums (including root folder)
• Maximum track: 2500 tracks
• Maximum track in one album: 999 tracks
Radio
Manual tuning
1
Press [RADIO, EXT-IN] (main unit:
[RADIO/EXT-IN]) to select “FM” or “AM”.
2
Press [
3
] or [
5
] to select the frequency of the
required station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
To improve the sound quality
When “FM” is selected
1
Press [RADIO MENU] to select “FM MODE”.
2
Press [
Y
,
U
] to select “MONO” and then press
[OK].
To cancel, select “STEREO”.
• “MONO” is also cancelled when you change the
frequency.
• Switch off “MONO” for normal listening.
When “AM” is selected
1
Press [RADIO MENU] to select “B.PROOF”.
2
Press [
Y
,
U
] to select “BP 1” or “BP 2” and then
press [OK].
Memory presetting
30 FM and 15 AM stations can be preset.
Preparation
Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN]) to
select “FM” or “AM”.
Automatic presetting
1
Press [OK] to select “LOWEST” or “CURRENT”
frequency.
2
Press [AUTO PRESET] to start presetting.
To cancel, press [
8
].
Note on CDs
• This system can access up to 99 tracks.
• This system can play MP3 files and CD-DA format audio
CD-R/RW that have been finalised.
• This system can fail to play some CD-R/RW because of
the condition of the recording.
Note on MP3s
• Files are treated as tracks and folders are treated as
albums.
• This system can access up to 999 tracks, 255 albums
(including root folder) and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
• To play in a certain order, prefix the folder and file names
with 3-digit numbers in the order you want them to play.
Limitations on MP3 playback
• If you have recorded MP3s on the same disc as
CD-DA, only the format recorded in the first session can
be played.
• Some MP3s cannot be played because of the condition
of the disc or recording.
• Recordings will not necessarily be played in the order
you recorded them.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
PM200_EP1_1gb.indd 7 PM200_EP1_1gb.indd 7 6/28/2011 1:52:21 PM 6/28/2011 1:52:21 PM