38
10 Service Position
Note: For description of the disassembly procedures, see the Section 9
10.1. Checking of Main P.C.B. (Side B)
Step 1 :
Remove the Rear Cabinet Block.
Step 2 :
Remove the Jack P.C.B..
Step 3 :
Remove the NFC P.C.B..
Step 4 :
Remove the Bluetooth Module.
Step 5 :
Remove the Battery Pack.
Step 6 :
Remove the Main P.C.B..
Step 7 :
Remove the Woofer Speaker (SP3).
Step 8 :
Remove the Top Ornament Block.
Step 9 :
Connect 11P FFC at connector (P1301) on the NFC
P.C.B..
Step 10 :
Connect 16P FFC at connector (CN1701) on the
Bluetooth Module.
Step 11 :
Connect 6P FFC at connector (P1901) on the Jack
P.C.B..
Step 12 :
Connect 17P FFC at connector (P1902) on the Jack
P.C.B..
Step 13 :
Connect 6P wire at connector (P1802) on the Main
P.C.B..
Step 14 :
Connect 8P FFC at connector (P1003) on the Main
P.C.B..
Step 15 :
Connect 2P wire at connector (P1403) on the Main
P.C.B..
Содержание SC-NA30GN
