Panasonic SC-NA30GN, Руководство по обслуживанию

Страница: 13 / 71

13
7.2. Doctor Mode
Here is the procedures to enter into Doctor Mode.
Step 1 : Turn on the unit.
Step 2 : Press and hold [LP]
→
[LP + POWER]
→
[LP + POWER + VOL+] on the unit.
Step 3 : LP LED start blinking with 250ms (Refer to Figure 7-2).
To exit the Doctor Mode
• Press the power button on the main unit.
7.2.1. Doctor Mode Table
Mode Description LED Indicators Panel Key
SELECTOR LP OTHER
SETTING
VOLUME
SETTING
LED 1
(Battery)
LED 2
(BT)
LED 3
(LP)
LP B.B.D
check
Mode No
Change
OFF
(Default)
VOL 10 - O
- Blink
Once
- depends
on BT
codec
(Default)
Exit Doctor Mode and Power Off
Exit Doctor
mode and
power OFF
Link Status
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
Key
Buttons
Mode
Name
LP mode = OFF
Volume Up
(clockwise
rotation) Software
Version No
Change
No
Change
No
Change
-
-
(Refer to Table 7-1)
Firmware version
Volume
Down BASS/
TREBLE
knob check No
Change
No
Change
No
Change
This check is compatible with
"Key LED check".
Rotate BASS/TREBLE knob
to any direction, and then
buzzer sounds.
-
Volume Down
(anticlockwise
rotation)
Key LED
Check No
Change
No
Change
No
Change
Volume Up (Power) →
LP (LP led) → BT (BT led)
→ power (END)
press and
hold [BT]
for 2sec NFC Lock
Release
(NFC_INIT) No
Change
No
Change
No
Change
- Opecon send "INIT"
command to NFC_IC_CHIP
No
Operation
(Default)
POWER
BT
connection
codec
check BT No
Change
No
Change
(Default) BT LED lights up or blinks
like following:
- BT connected
via aptX: on
- BT connected
via SBC: blink
(100msOn/100msOff)
Clear all setting and memory