Panasonic SC-NA30GN, Руководство по обслуживанию

Страница: 12 / 71

12
7 Service Mode
This unit is equipped with features of service mode & doctor mode setting for checking the functions & reliability.
7.1. Service Mode
Here is the procedures to enter into Service Mode.
Step 1 : Turn on the unit.
Step 2 : Press and hold [BT]
→
[BT + POWER]
→
[BT + POWER + VOL+] on the unit.
Step 3 : LP LED start blinking with 250ms (Refer to Figure 7-1).
To exit the Service Mode
• Press the power button on the main unit.
7.1.1. Service Mode Table
Mode Description LED Indicators Panel Key
SELECTOR LP OTHER
SETTING
VOLUME
SETTING
LED 1
(Battery)
LED 2
(BT)
LED 3
(LP)
Volume Up
(clockwise
rotation) Software
Version No
Change
No
Change
No
Change
-
Exit Service Mode and Power Off Exit Service
mode and
power OFF
Link Status
“O” means LED on
“X” means LED off
“*” means LED blink 125ms
Key
Buttons
Mode
Name
(Refer to Table 7-1)
Firmware version
BT
POWER
BT
Version No
Change
No
Change
No
Change
-
(Refer to Table 7-1)
BT version
Exit Service Mode
and clear all setting
without total Running
Time, Error History