Panasonic SC-MAX670, Руководство пользователя

Страница: 9 / 24

9
VQ
T5
F
3
5
ENGL
IS
H
USB
You can connect and play music tracks from your USB
device.
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The system cannot
recognize USB device connected through a cable.
Decrease the volume and connect the USB device to
the USB port.
Hold the main unit when connecting or disconnecting the
USB device.
Note:
USB status indicator lights up when selected.
1
Press [USB] to select “USB B” or “USB A”.
2
Press [
1
/
;
] to start playback.
For other operations, refer to “Disc”.
You can view the available information on the display
panel.
Press [DISPLAY].
Radio
1
Press [RADIO/EXT-IN] to select “FM”.
2
Press [
6
] or [
5
] to select the frequency of
the required station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
“STEREO” is shown when a stereo broadcast is
being received.
Using the main unit
1
Press [RADIO/EXT-IN] to select “FM”.
2
Press [TUNE MODE] to select “MANUAL”.
3
Press [
:
/
6
] or [
5
/
9
] to select the
frequency of the required station.
In situations where the station's signal is weak, sound quality
may be improved by manually selecting Mono reception.
1
Press [PLAY MENU] to select “FM MODE”.
2
Press [
2
,
1
] to select “MONO” and then press [OK].
To cancel, select “STEREO”.
“MONO” is also canceled when you change the
frequency.
30 FM stations can be preset.
1
Press [OK] to select “LOWEST” or “CURRENT”
frequency.
2
Press [PLAY MENU] to select “A.PRESET” and
then press [OK].
“START?” is shown.
3
Press [OK] to start presetting.
To cancel, press [
∫
].
1
Press [
6
] or [
5
] to tune in to the station.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Press the numeric buttons, [
:
] or [
9
] to select
the preset station.
Using the main unit
1
Press [TUNE MODE] to select “PRESET”.
2
Press [
:
/
6
] or [
5
/
9
] to select the preset
station.
Connecting a USB device
ILLUMINATION
A
B
USB device
(not supplied)
USB status indicator
Playback
• Stop playback
Press [
∫
]. “RESUME” is shown.
Press [
1
/
;
] to continue playback.
OR
Press [
∫
] two times to stop the playback fully.
Viewing available information
Manual tuning
Improving the sound quality
Memory presetting
Automatic presetting
Manual presetting
Selecting a preset station
SC-MAX670P_eng.book 9 ページ ２０１４年２月２６日 水曜日 午後５時４９分