Panasonic SC-HTX500, Руководство по эксплуатации

Страница: 6 / 28

VQT2R75
6
Standby/on button
( page 14)
Input selector
( page 14)
For adjusting speaker output
( page 13)
Test signal output
( page 13)
For adjusting the volume
( pages 13, 14)
For using “CLEAR-MODE
DIALOG”
( page 15)
Muting ( page 21)
For returning to the previous menu
( page 18)
For displaying the current status/
Entering setup mode
( pages 18 to 21)
Making adjustment and settings/
confirming settings
( pages 18 to 21)
For selecting or cancelling Dolby
Virtual Speaker, Dolby Pro Logic and
sound mode
( page 15)
Remote control
(This manual explains the operations mainly using the remote control.)
Note
• Do not place an object between the signal sensor and the remote
control.
• Do not expose the signal sensor to the direct sunlight or the strong light
of a fluorescent lamp.
• Keep the transmission window and the system’s sensor free from dust.
(R6/LR6, AA)
Remote control
signal sensor
Press on the tab to open.
VOLUME
CLEAR-MODE
DIALOG
INPUT
SELECTOR
Transmission
window
30° 30°
Within 7 meters at the
front (The remote
controlling range varies
according to the angles.)
Control panel
Insert so the poles ( ( and ) )
match those in the remote control.
Use manganese batteries or
alkaline batteries.
For using “WHISPER-MODE
SURROUND”
( page 15)
The distance and the angles
are approximate.
Inserting the batteries
Using the remote control
Control guide
• Do not mix old and new batteries.
• Do not use different types of batteries at the same time.
• Do not take apart or short circuit.
• Do not attempt to recharge alkaline or manganese batteries.
• Do not use batteries if the covering has been peeled off.
• Do not heat or expose to flame.
• Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store them in a cool, dark place.
Before use
Control guide
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.