10
R
Q
T
X
12
67
Disc operations
1
Press [
Í
] to turn the unit on.
2
Open the sliding door. (
>
9)
3
With the label of the disc facing
towards you, tilt the disc into the
disc tray under the sliding door.
4
Place the disc onto the spindle
in the centre and then push the
disc down until it clicks into
place.
≥
Make sure that the unit does not fall when
inserting the disc.
5
Close the sliding door. (
>
9)
∫
Removing a disc
1
Open the sliding door.
2
Hold the centre and the top right of the disc and pull the top
right of the disc to unlock it from the spindle.
3
Tilt the disc so as not to touch the sliding door or the lens and
remove the disc.
1
Press [
Í
] to turn the unit on.
2
Insert the disc to be played.
3
Press [CD].
4
Press [
1
/
;
] to start play.
After performing steps 1-3 in “Basic play”
1
Press [PLAY MENU] repeatedly to select
“REPEAT”.
2
Press [
2
,
1
] to select “ON REPEAT” and press
[OK].
3
Press [
1
/
;
] to start play.
≥
To stop repeat play, select “OFF REPEAT” in step 2.
After performing steps 1-3 in “Basic play”
1
Press [PLAY MENU] repeatedly to select “PLAY
MODE”.
2
Press [
2
,
1
] to select the following mode and
press [OK].
3
Press [
1
/
;
] to start play.
≥
During random play, you cannot skip to the previous track.
≥
The current play mode is cleared when you open the sliding door.
≥
To repeat program play or selected play mode, select “ON REPEAT” in PLAY
MENU.
Enables you to program up to 24 tracks.
After performing steps 1-3 in “Basic play”
1
Press [PROGRAM] during the stop mode.
3
Press [
1
/
;
] to start play.
≥
The program memory is cleared when you open the sliding door.
Inserting a disc
Basic play
Stop
Press [
∫
].
Pause
Press [
1
/
;
]. Press again to resume play.
Skip
Press [
:
] or [
9
] to skip track.
Press [
3
,
4
] to skip album. (MP3)
Search
[CD]
Press and hold [
6
] or [
5
].
Direct access
play
(Play starts from
the track you
selected.)
[CD]
: Press the numeric buttons to select
the track.
[MP3]
:
1
Press [
3
,
4
] to select the album.
2
Press [
9
] once and then the
numeric buttons to select the track.
≥
This function does not work during random play
or program play.
View contents
information
Press [DISPLAY] repeatedly during play
or pause.
The current track’s information, etc. is
displayed.
≥
Maximum number of displayable characters:
approximately 30
≥
This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags.
Text data that is not supported will not be
displayed or shown differently.
Repeat play
Play mode function
1-TRACK
1TR
:
Plays one selected track on the disc.
1-ALBUM
1ALBUM
:
[MP3]
Plays one selected album on the disc.
≥
Press [
3
,
4
] to select the album.
RANDOM
RND
:
Plays a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
:
[MP3]
Plays all tracks in one selected album
randomly.
≥
Press [
3
,
4
] to select the album.
Program play
2
[CD]
:
Press the numeric buttons to select the track.
≥
To program more tracks, continue by pressing the
numeric buttons.
[MP3]
:
1
Press [
3
,
4
] to select the album.
2
Press [
9
] once and then the numeric buttons to
select the track.
3
Press [OK].
To program more tracks, repeat steps
1
-
3
.
Cancel programme
mode
Press [PROGRAM] in the stop mode to
clear “PGM” indicator from the display.
Check programme
contents
Press [
:
] or [
9
] when “PGM” is
displayed in the stop mode.
Delete last
programmed track
Press [DEL] in the stop mode.
Clear all
programmed
tracks
1
Press [
∫
] in the stop mode.
2
Press [
∫
] again while blinking
“CLR ALL”.
SC-HC55DB&35GN-RQTX1267-B.book 10 ページ ２０１１年２月１８日 金曜日 午後５時５８分
