19
TQBJ2049
4
Put up the wall mounting sheet on the wall where
the unit is to be mounted.
≥
Spread out the wall mounting sheet when tapping it to
the wall.
5
Make holes on the wall at the center of each cross
mark on the sheet.
≥
Take the sheet away from the wall after its use.
6
Attach each wall mount bracket to the wall with two
screws (not supplied).
≥
Use a level to ensure both wall mount brackets are
level.
7
Attach the safety holder with two screws (not
supplied) to the wall.
8
Attach the unit.
1 Hook the unit securely onto the wall mount brackets
with both hands.
≥
Connect the antenna and the AC power supply cord to
the unit before hanging the unit onto the wall. (
l
6)
2 Slightly uplift the unit vertically until reaching the
hook of the safety holder, and push lower so that
the unit is hooked and locked in the safety holder.
≥
The unit will be locked onto the safety holder with a click sound.
≥
After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall mount brackets
and the safety holder.
9
Attach the fall prevention cord (not supplied) to the
wall.
≥
Make sure that the slack of the cord is minimal.
∫
To release the unit from the safety holder
While pressing two catches of the safety holder, uplift
the unit vertically.
Wall mounting sheet
Adhesive tape (not supplied)
Wall
420 mm (16
17
/
32
q
)
102.5 mm
(4
1
/
16
q
)
130.5 mm
(5
1
/
8
q
)
141 mm
(5
9
/
16
q
)
100 mm
(3
15
/
16
q
)
118.5 mm
(4
11
/
16
q
)
300 mm (11
13
/
16
q
)
100 mm
(3
15
/
16
q
)
39 mm (1
17
/
32
q
)
73 mm
(2
7
/
8
q
)
Space required
At least
30 mm (1
3
/
16
q
)
‰
7.5 mm (
19
/
64
q
)
to
‰
9.4 mm (
3
/
8
q
)
‰
4.0 mm (
5
/
32
q
)
Wall mount bracket
At least
30 mm (1
3
/
16
q
)
‰
7.5 mm (
19
/
64
q
)
to
‰
9.4 mm (
3
/
8
q
)
‰
4.0 mm (
5
/
32
q
)
Safety holder
Wall
AC power
supply cord
Wall
Hook
Wall mount bracket
Safety holder
Cord (not supplied)
Screw eye (not supplied)
Wall
Catches
SC-HC400PC.book 19 ページ ２０１７年３月１４日 火曜日 午後１時１９分
