12
TQBJ2049
Sound adjustment
The following sound effects can be added to the audio
output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [
2
,
1
] to select the setting and then press
[OK].
≥
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
≥
When “AUX” is selected as the source, you can select
“INPUT LEVEL” to adjust the sound input level of the
external device. (
l
6)
You can save your desired sound settings to
“SOUND 1”, “SOUND 2” or “SOUND 3” as
“MY SOUND”.
1
Adjust your desired sound effects. (
l
above)
2
Press [SETUP] to select “SAVE MY SOUND”.
3
Press [
2
,
1
] to select a setting number and then
press [OK].
≥
“SAVED” is displayed.
≥
The sound settings previously saved will be replaced
when you save new settings to the same setting
number.
Recalling the sound settings you have
saved
1
Press [SOUND] to select “MY SOUND”.
2
Press [
2
,
1
] to select the desired sound setting
number and then press [OK].
Press [D.BASS] to select “ON D.BASS” or
“OFF D.BASS”.
≥
Alternatively, press [D.BASS] on the unit.
Press [PRESET EQ] repeatedly to select “HEAVY”
(heavy), “SOFT” (soft), “CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
≥
When “PRESET EQ” is selected, Bass and Treble settings
will be changed to the settings in preset EQ setting.
Clock and Timer
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Press [
3
,
4
] to set the time and then press [OK].
∫
To check the time
Press [CLOCK/TIMER].
≥
The clock is reset when there is a power failure or when the
AC power supply cord is removed.
≥
Reset the clock regularly to maintain accuracy.
The sleep timer can turn the unit off after a set time.
Press [SLEEP] repeatedly to select the setting
(in minutes).
“SLEEP 30”
-.
“SLEEP 60”
-.
“SLEEP 90”
-.
“SLEEP 120”
^----------------
“OFF” (Cancel)
(""""""}
≥
The remaining time is indicated on the unit’s display at every
minute except when other operations are performed.
“SLEEP 1” is always shown when only 1 minute remains.
≥
The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
“MY SOUND”
(My sound)
“SOUND 1”, “SOUND 2”, or
“SOUND 3”.
(
l
below, “Saving the sound
settings”)
“BASS” (Bass) or
“TREBLE” (Treble)
Adjust the level (
j
4 to
i
4).
“SURROUND”
(Surround)
“ON SURROUND” or
“OFF SURROUND”.
≥
Alternatively, press [SURROUND]
on this unit.
“CLEAR-MODE
DIALOG”
(Clear-mode
Dialogue)
“ON CLEAR-MODE DIALOG” or
“OFF CLEAR-MODE DIALOG”.
“WALL MOUNT”
(Wall mount)
“MODE 1 WALL MOUNT”,
“MODE 2 WALL MOUNT” or
“OFF WALL MOUNT”.
≥
Alternatively, press [WALL
MOUNT] on this unit.
Saving the sound settings
D.Bass
Preset EQ
Setting the clock
Sleep timer
SC-HC400PC.book 12 ページ ２０１７年３月１４日 火曜日 午後１時１９分
