14
RQT9640
Sound adjustment
The following sound effects can be added to the audio
output.
1
Press [SOUND] repeatedly to select the effect and
then press [OK].
2
Press [
3
,
4
] to select the setting and then press
[OK].
*1: This function can also be selected with the [D.BASS] button
on the unit.
≥
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
Clock and Timer
This is a 24-hour clock.
1
Press [SETUP] repeatedly to select “CLOCK” and
then press [OK].
2
Press [
3
,
4
] to set the time and then press [OK].
≥
To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥
The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥
Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock (
>
left).
∫
Setting the timer
1
Press [SETUP] repeatedly to select
“TIMER ADJ” and then press [OK].
2
Press [
3
,
4
] to set the starting time
(“ON TIME”) and then press [OK].
3
Press [
3
,
4
] to set the finishing time
(“OFF TIME”) and then press [OK].
≥
To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
≥
The music source and volume will also be displayed if the
timer is turned on. (
>
below)
∫
Turn the timer on
1
Select the music source*
2
and set the desired
volume.
2
Press [SETUP] repeatedly to select
“TIMER SET” and then press [OK].
3
Press [
3
,
4
] to select “SET” and then press [OK].
≥
“
F
” is displayed.
4
Press [
Í
] to turn the unit off.
*2: “CD”, “USB”, “IPOD”, “DAB+” (
[SC-HC37DB]
), “FM” and “AM”
(
[SC-HC37]
) can be set as the music source.
≥
This unit can be used as normal after the timer is set,
however:
≥
Turn the unit to standby mode before the timer start time.
≥
Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
≥
To turn the timer off, select “OFF” in step 3.
≥
The unit will turn on at the preset time, with the volume
increasing gradually to the preset level.
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] repeatedly to select “SLEEP” and
then press [OK].
2
Press [
3
,
4
] to set the time (in minutes) and then
press [OK].
“SLEEP 30”
,.
“SLEEP 60”
,.
“SLEEP 90”
,.
“SLEEP 120”
^------------------------.
OFF (Cancel)
(------------------------J
≥
The remaining time is indicated on the unit’s display except
when other operations are performed.
≥
The play timer and sleep timer can be used together. The
sleep timer always has priority.
Direct-Vocal
Surround
(D.SURROUND)
“LEVEL 1”, “LEVEL 2” or “OFF”.
≥
The factory preset is “OFF”.
Preset EQ
(PRESET EQ)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
≥
The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Adjust the level (
j
4 to
i
4).
Dynamic Bass*
1
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
≥
The factory preset is
“ON D.BASS”.
Setting the clock
Play timer
Sleep timer
SC-HC37DBGN_37GN~RQT9640-1L.book Page 14 Tuesday, February 28, 2012 11:30 AM
