E
N
G
L
IS
H
ENGLISH
RQT9576
8
8
Sound effects
1
Press [SOUND] to select a sound effect.
2
Press [
R
,
T
] to select the desired setting.
PRESET EQ
“HEAVY” : Adds punch to rock.
“SOFT” : For background music.
“CLEAR” : Clarifies higher frequencies.
“VOCAL” : Adds gloss to vocal.
“FLAT” : Cancels the sound effect.
BASS
“BASS -4” to “BASS +4”.
TREBLE
“TREBLE-4” to “4”.
D.BASS
“ON D.BASS” or “OFF D.BASS”.
SURROUND
“ON SURROUND” or
“OFF SURROUND”.
Radio
30 FM and 15 AM stations can be preset.
Preparation
Connect the antennas (
Z
page 5).
Press [RADIO] to select “FM” or “AM”.
Automatic presetting
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [
R
,
T
] to select “LOWEST” or “CURRENT”
frequency.
LOWEST :
To begin auto preset from the lowest
frequency.
CURRENT : To begin auto preset from the current
frequency
.
To change the frequency, refer to “Manual tuning and
presetting”.
3
Press [OK] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order.
To cancel, press [
8
].
Manual tuning and presetting
1
Press [PLAY MENU] to select “TUNEMODE”.
2
Press [
R
,
T
] to select “MANUAL” and then press
[OK].
3
Press [
2
/
3
] or [
5
/
6
] to tune in to the
station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“STEREO” is shown when the system is tuned in to a
stereo broadcast.
To preset the station
4
Press [OK].
5
Press [
R
,
T
] to select a preset number.
6
Press [OK].
Do steps 3 through 6 again to preset more stations.
Note:
A station previously stored is overwritten when another
station is stored in the same preset number.
Selecting a preset station
1
Press [PLAY MENU] to select “TUNEMODE”.
2
Press [
R
,
T
] to select “PRESET” and then press
[OK].
3
Press [
2
/
3
] or [
5
/
6
] to select the preset
station.
Improving the sound quality
When “FM” is selected
1
Press [PLAY MENU] to select “FM MODE”.
2
Press [
R
,
T
] to select “MONO” and then press [OK].
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency.
To memorise the setting
Continue with steps 4 through 6 of “Manual tuning and
presetting”.
Checking the signal status
Press [DISPLAY].
FM
The FM signal is in monaural.
The system is not tuned in to a station.
FM ST
The FM signal is in stereo.
FM MONO
“MONO” is selected as the “FM MODE”.
AM allocation setting
(by main unit only)
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [RADIO] to select “AM”.
2
Press and hold [RADIO].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps again.
• After you change the setting, preset frequencies are
erased.
HC27_GS1_1en.indd 8
HC27_GS1_1en.indd 8
5/18/2012 1:33:09 PM
5/18/2012 1:33:09 PM
