44
VQT2Z56
I can’t connect to the network.
≥
Confirm the network connection and settings. (
>
17, 40)
≥
Check the operating instructions for each device and
connect accordingly.
When using Wireless LAN connection, video or audio
from the DLNA Certified media server is played back
intermittently, not played back or video frames are
dropped during playback.
≥
Higher transfer rate router such as 802.11n (2.4 GHz or 5
GHz) Wireless router (Access Point) may solve the problem.
If you use 802.11n (2.4 GHz or 5 GHz) Wireless router
(Access Point), it is necessary to set the encryption type to
“AES”.
Simultaneous use with a microwave, cordless telephone etc.
at 2.4 GHz may result in connection interruptions or other
problems.
≥
On the “Access Point Connection Setting” screen (
>
40), the
continuous lighting of at least 4 “Reception” indicators is the
target for a stable connection. If 3 or fewer indicators are lit
or the connection is being interrupted, change the position or
angle of your Wireless router (Access point) and see if the
connection state improves. If there is no improvement,
connect to a wired network and perform the “Network Easy
Setting” (
>
19) again.
The contents of the USB device cannot be read.
≥
USB devices connected using USB extension cable other
than the supplied with the Wireless LAN Adaptor DY-WL10
(optional) or a USB hub may not be recognised by this unit.
No power.
≥
Ensure the AC mains lead of the active subwoofer is
connected properly.
After turning the subwoofer on, it immediately turns off.
≥
Unplug the AC mains lead and consult your dealer.
No sound from the subwoofer.
≥
Check that the active subwoofer is turned on.
≥
Check that the wireless link indicator lights green. (
>
18)
The wireless link indicator lights red.
“
[W]
” is flashing or does not light on the main unit’s
display.
≥
There is no link between this unit and the active subwoofer.
j
Check that this unit and the active subwoofer are turned
on.
j
Ensure that the digital transmitter is fully inserted into the
digital transmitter dock on this unit. (
>
16)
j
Turn the active subwoofer off and then back on.
Alternatively, turn the active subwoofer off, disconnect the
AC mains lead and then reconnect it.
Consult your dealer if the problem persists.
The audio from the subwoofer is interrupted.
≥
The active subwoofer is automatically seeking a clear
channel. If the interference persists, try moving the other
wireless devices to another location outside the range of the
active subwoofer or move the active subwoofer nearer to this
unit. (
>
12)
BD-Video or DVD-Video is not played.
≥
Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (
>
11)
≥
You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (
>
38)
≥
Some BD-Video can only be output with HDMI.
I can’t play back BD-Live.
≥
The SD card is write-protected. (
>
11)
≥
Confirm that this unit is connected to the broadband Internet. (
>
17)
≥
Confirm the “BD-Live Internet Access” settings. (
>
38)
≥
Confirm an SD Card is inserted into the SD Card slot. (
>
22)
Alternative soundtrack and subtitles cannot be selected.
≥
The languages are not recorded on the disc.
≥
You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (
>
25)
Angle cannot be changed.
≥
Angles can only be changed during scenes where different
angles are recorded.
Network
Active Subwoofer
Other difficulties with playback
SCBFT800_VQT2Z56_eng.book 44 ページ ２０１０年８月４日 水曜日 午後５時１０分
