11
Radio
Manual tuning
1
Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN])
to select “FM” or “AM”.
2
Press [
3
] or [
5
] to select the frequency of the
required station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
“
” is shown when a stereo broadcast is being
received.
Improving the sound quality
When “FM” is selected
1
Press [RADIO MENU] to select “FM MODE”.
2
Press [
Y
,
U
] to select “MONO” and then press [OK].
To cancel, select “STEREO”.
“MONO” is also canceled when you change the
frequency.
When “AM” is selected
1
Press [RADIO MENU] to select “B.PROOF”.
2
Press [
Y
,
U
] to select “BP 1” or “BP 2” and then
press [OK].
Memory presetting
30 FM and 15 AM stations can be preset.
Automatic presetting
1
Press [OK] to select “LOWEST” or “CURRENT”
frequency.
2
Press [RADIO MENU] to select “A.PRESET” and
then press [OK].
“START?” is shown.
3
Press [OK] to start presetting.
To cancel, press [
8
].
Manual presetting
1
Press [
3
] or [
5
] to tune in to the station.
2
Press [PROGRAM].
3
Press the alphanumeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies the
same preset number.
Selecting a preset station
Press the alphanumeric buttons, [
2
] or [
6
] (main
unit: [
2
/
3
] or [
5
/
6
]) to select the preset
station.
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated
in
10 kHz steps.
1
Press [RADIO/EXT-IN] to select “FM” or “AM”.
2
Press and hold [RADIO/EXT-IN].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps again.
• After you change the setting, preset frequencies are
erased.
AKX54GN_en.fm Page 11 Wednesday, March 7, 2012 5:38 PM
