background image

RQT6713

8

CDs

CD selection

Choose CDs with this mark:

Do not:

use irregularly shaped CDs.

attach extra labels and stickers.

use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.

attach scratch proof covers or
any other kind of accessory.

write anything on the CD.

clean CDs with liquids. (Wipe
with a soft, dry cloth.)

use CDs printed with label printers available on the market.

To prevent damage

Always observe the following points:

Load only 1 CD on the tray.

Load CDs as shown in the figure.
An adaptor is not needed with 8 cm CDs (singles).

Set the system on a flat, level surface.

Always unload all CDs before moving the unit.

Do not:

set the unit on top of magazines, inclined surfaces, etc.

move the unit while a tray is opening/closing, or when loaded.

put anything except a CD in the tray.

use cleaning CDs or CDs which are badly warped or cracked.

disconnect the AC mains lead from the household mains socket
during disc changing operation.

8  cm CD

12  cm CD

This unit can play CD-DA (digital audio) format audio CD-R and
CD-RW that have been finalized (a process that enables CD-R/
CD-RW players to play audio CD-R and CD-RW) upon completion
of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.

1

Press [

c

, OPEN/CLOSE] to open the tray.

The unit comes on.

2

Set a CD in the tray. 

(Label must face upward.)

To continue loading CDs in the other trays

Press [1]–[5] to select the required tray and press [

c

, OPEN/

CLOSE] to open the tray.

Press [

c

, OPEN/CLOSE] to close the tray.

3

Press [1]–[5] to play your desired disc.

(Alternatively, you can press [

:

/

J

, CD] if the current disc is your

desired CD.)
The track number and its elapsed playing time are shown.

Display during play

(example):

Use the CD Play Mode function’s ALL-DISC mode to play CDs in
succession. (

page 9)

To stop the disc play

Press [

L

, STOP].

The total number of tracks and total playing time are shown.

” (SC-AK110: “

”) indication

It indicates current disc has 16 or more tracks.

One touch play

During standby mode and when a CD is loaded, press [

:

/

J

, CD] or

[1]–[5].
The unit comes on and play starts.

To pause

Press [

:

/

J

, CD] during play.

Press again to resume play.

To search forward/

Hold down [

g

/REW/

3

] (backward)

backward

or [

f

/FF/

4

] (forward) during play or pause.

To skip forward/

Press  [

g

/REW/

3

] (backward) or

backward

[

f

/FF/

4

] (forward) during play or pause.

 Notes

During 1-RANDOM or A-RANDOM play (

page 9), you cannot

skip to tracks already played.

During program play (

page 9), 1-RANDOM or A-RANDOM play,

you can search only within the track.

Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.

CD display

You can display the remaining play time of the current track.

SC-AK310

Remote control only
Press [CD DISP] during play or pause.

SC-AK210

Remote control only
Press [CD/RDS DISP] during play or pause.

SC-AK110

Press [-DISP/–DEMO] during play or pause.

Remote control: Press [CD DISP].

Every time you press the button:
Elapsed play time 

 

Remaining play time

 Note

When track number 25 or greater is playing, remaining play time
display shows “– –:– –”.

Current
disc
indicator

Elapsed playing time (of current track)

Track number

xx

xx

xx

xxx

xx

xx

xx

xx

xx

x

xx

xx

xx

xxx

xx

xx

xx

xx

xx

xx

xx

xxx

xx

xxx

xx

x

XXXX XXXX XXXXX

XXXX XX

XXXX XXXX XXXXX

XXXX XXXX XXXXX

XXXX XXXX 

 

XXXXXX XXX XXXXXXX

XXXX XX XXXXX

XXXX XX XXXXX

XXXX XXXX XXXXX

XXXX XX XXXXX

XXXX XXXX XXXXX

 

XX

XX

XX

 X

XX

 X

XX

XX

XX

XX

XX 

XX

 X

XX

XX

XX

XX

 X

X X

XX

XX

XX

XX

 X

XX

X X

XX

XX

XX

XX

 X

X X

XX

XX

XX

XX 

XX

XX 

XX

XX

X

XX

X X

XX

 X

XX

XX

XX

XX

XX

XX

XX

 X

XX

X

XX

X X

XX

X

XX

XX

XX

X X

XX

X

XX

XX

XX

X X

XX

XX

XX

 

XX

XX

X X

XX

XX

XX

XX

XX

XX

XX

 X

XX

X

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

 

XX

XX

 

SLEEP

SLEEP

CLOCK

CLOCK
 TIMER

 TIMER

PL

PLAY

REC

REC

AUTO OFF

UTO OFF

DISC

DISC

PROGRAM

PROGRAM

S.SOUND EQ

S.SOUND EQ

PRESET EQ

PRESET EQ

MUTING

MUTING REW

REW

CLEAR

CLEAR

CD DISP

CD DISP

DIMMER

DIMMER PLAY MODE

PLAY MODE

FF

FF

1

2

3

4

5

6

7

8

9

0

10

10

CD

CD

AUX

AUX

TUNER

TUNER

BAND

BAND

TAPE

TAPE

VOL

VOL

VOL

VOL

3

1 • 2 

CD/RDS DISP

CD DISP

SC-AK110

SC-AK210

SC-AK310

Содержание SC-AK110

















Отзывы: