OTHER OPERA
TIONS
ENGLISH
31
RQT8043
RQTX0067
Using sound effects
Note
• The following sound effects may not be available
or have no effect depending on the type of
source, disc as well as recording format or, when
headphones are used.
• You may experience a reduction in sound quality
when these sound effects are used with some
sources. If this occurs, turn the sound effects off.
• It is not possible to turn on Surround Enhancer, EQ
and Super Surround at the same time.
Adjusting the amount of bass: Subwoofer level
You can adjust the amount of bass. The unit
automatically selects the most suitable setting
according to the type of playback source.
•
When AV or AUX source is selected
SUB W 1 (factory preset)
SUB W 2
SUB W 4
SUB W 3
•
When another source is selected
SUB W 2 (factory preset)
SUB W 3
SUB W 1
SUB W 4
• To check the current setting, press [SW.LEVEL].
• The setting you make is retained, and recalled
every time you play the same type of source.
Enhancing the sound from the center speaker:
Center Focus
This applies to discs where the dialogue is
recorded in the center channel.
You can make the sound of the center speaker
seem like it is coming from within the television.
C FOCUS ON
C FOCUS OFF
• This also works when Dolby Pro Logic
II
is
turned on.
Enhancing the stereo sound: Super Surround
Movie
: Use this mode when playing movie
software.
Music
: Adds surround effects to stereo sources.
Off
: Cancel
•
This works only in FM, AV, Music P. and AUX
mode.
•
Super Surround and EQ can be turned on
simultaneously.
Enhancing the surround sound effect:
Surround Enhancer
Automatically adjusts each speaker to enhance
the surround sound effect of multi-channel audio.
When playing two-channel audio, the audio of the
L/R front speakers is also output through the rest
of the speakers creating a surround sound effect.
(Press and hold)
SRD ENH ON
SRD ENH OFF
Changing the sound quality: Equalizer Mode (EQ)
HEAVY
: Adds punch to rock.
CLEAR
: Clarifi es higher sounds.
SOFT
: For background music.
FLAT
: Cancel (no effect is added) (factory
preset).
• To check the current setting, press [-EQ].
• You can adjust the volume of the surround
speakers to get the best surround effect
(
\
page 32, Adjusting the volume of each
speaker: Speaker level adjustments).
• It is not possible to turn on EQ and Surround
Enhancer at the same time.
Factory preset when AV or AUX source is selected.
RQTX0067-B_new18.indd 31
RQTX0067-B_new18.indd 31
3/19/07 5:48:35 PM
3/19/07 5:48:35 PM